EMU Sensor/Crank/Cam Sensors Problem (Revisted)
 

Ok, my car nearly overheated today, which i thought was unusual because my car isnt turboed yet. i checked, and my fans were not spinning! I did some more research on m.net, and found out more about the problems with voltage of 5v or 12v. Now, i dont have the ability to check the accuracy of the amount of volts using an oscilloscope, nor do did i fully understand the post of what to do to fix the problem.

http://autos.groups.yahoo.com/group/...e/message/1124
(original yahoo group post)

i checked for my cam angle sensor too, and it too is not giving off a signal. I do have a somewhat strange idle as well... i posted earlier about the knock sensor problem as well, i think this also has to deal with voltage problems.

im having the problems on a 99 miata, could you guys help me out? i have no clue on how to make a logic/board in order to solve this problem. some pictures would be great too :sadwavey:

im sure you guys have discussed this issue before, but it can no longer be found in detail!

everyone, thanks in advance. i hope to get this problem solved by tomorrow or tuesday as the turbo is going in on wednesday.

https://www.miataturbo.net/e-manage-10/emu-2001-miata-problem-spark-12806/
chack this out it helped me a lot.