Anyone else with timing issue with 96-97 - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


ECUs and Tuning Discuss Engine Management, Tuning, & Programming

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 08-02-2010, 10:55 AM   #1
Junior Member
Thread Starter
iTrader: (4)
 
Join Date: Jan 2008
Location: South Carolina
Posts: 262
Total Cats: 0
Default Anyone else with timing issue with 96-97

I have been fighting with a timing issue for a while. I cannot figure out the issue. I have checked the timing belt about 3 times. All the marks line up well. The CAS is fine. But, I have never really looked at my Crank Angle Sensor before. But here is the issue... I am running 12# of boost and I am at 12deg timing with NO timing retard at all. I should be hearing tons of Pre Det right now. I am about to pull my hair out over this.

My setup:
1.8 stock block (ARP head studs)
BRP dual feed fuel rail
supra 307 inj
begi fmu
255 pump
bipes
ngk iridium plugs one stage colder than stock
bipes acu (bypassed right now)
tdr style intercooler
begi mani
t28 turbo
2.5 exhaust

Any help would be GREAT...
localtech is offline   Reply With Quote
Old 08-02-2010, 12:03 PM   #2
Junior Member
Thread Starter
iTrader: (4)
 
Join Date: Jan 2008
Location: South Carolina
Posts: 262
Total Cats: 0
Default

I am going to check the air gap and the resistance on the CrAS tonight. I will know then what is up. Hopefully...

I have got to figure this out.

Anyone heard of a Timing belt streching? I havent.
localtech is offline   Reply With Quote
Old 08-02-2010, 12:34 PM   #3
Boost Czar
iTrader: (61)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 72,899
Total Cats: 1,792
Default

which mark on your pulley is aligned with TDC when #1 is TDC. the left or right mark?
Braineack is offline   Reply With Quote
Old 08-02-2010, 01:27 PM   #4
Junior Member
Thread Starter
iTrader: (4)
 
Join Date: Jan 2008
Location: South Carolina
Posts: 262
Total Cats: 0
Default

I will have to check. I have just always pulled all of the plastics off and checked the mark on the crank gear. It should be the right mark correct?
localtech is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Raleigh: Fiberglass headlight scope, 1.6L ECU, AFM, Hardtop latches, more bigmackloud Miata parts for sale/trade 13 09-22-2017 01:34 PM
My solution for Oiltemp and Oilpressure input into Megasuirt (MS3) Zaphod MEGAsquirt 41 01-24-2016 01:25 PM
Bad head gasket or ? shooterschmidty Engine Performance 8 09-30-2015 11:28 PM
Odd Steering issue interestedofold Suspension, Brakes, Drivetrain 5 09-29-2015 02:42 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 08:15 AM.