My 4-year old LC-1 is sticking at 15.0 again
Output #1 is going to the gauge.
Output #2 goes to MS. My track car's LC-1 is now sticking at 15.0, 14.9, and 15.1 on output #1, 10.0 on output #2. This happens for long periods of time, maybe hours on a road trip, even after power cycling. I reset and recalibrated last night (fun) with the same result. Any idea what's going on? |
4 years sounds about right for the life of the sensor.
|
BRB, burning sensor with vodka.
|
Joe Perez recommends rum.
|
Originally Posted by Reverant
(Post 940159)
I recommend ouzo.
|
I only drink beer.
|
Douse in booze. Light on fire.
Acquire AFX. |
Originally Posted by concealer404
(Post 940191)
Acquire AFX.
|
Originally Posted by hustler
(Post 940209)
Gigantic controller, stupid rectangular display, single output, overpriced. lol
|
Originally Posted by concealer404
(Post 940217)
Accurate, though, and uses better sensors.
|
Originally Posted by hustler
(Post 940220)
More or less accurate than the Innovate stuff? I want to know what they were thinking when they designed that display. Do they expect me to zip tie it to something on my dash? Really?
That said, they're comparing it against their sniffers, sooo... what's the baseline? The display doesn't bother me personally, but i also hate having a shitload of round gauges. It's also easy to read. |
probably because it reads just as far off as the stupid sniffers my dyno operators use.
|
Originally Posted by Braineack
(Post 940224)
probably because it reads just as far off as the stupid sniffers my dyno operators use.
Far off compared to your Innovate, i ASSume? |
Originally Posted by concealer404
(Post 940221)
General consensus among the local tuners/dyno operators is that it's more accurate than the LC1, at least... no anecdotes vs. the MTX-L yet.
That said, they're comparing it against their sniffers, sooo... what's the baseline? The display doesn't bother me personally, but i also hate having a shitload of round gauges. It's also easy to read. |
Originally Posted by concealer404
(Post 940249)
Chicken vs. egg.
Far off compared to your Innovate, i ASSume? |
I'm probably just getting an MTX-L since all these damn sensors are $80+ shipping.
|
Originally Posted by hustler
(Post 940256)
Let me get this straight, a 1"x2" gauge with a numeric display is inferio to a 1.5"x4"x5" that fits in nothing? I appreciate the comment, but it's 50% more expensive, the replacement sensors are 50% more expensive, and the controller is huge and you basically have to zip-tie it somewhere.
I'm using the Innovate Auto Timer as my display with my LC-1. I'm not in love with it. |
MTX-L for the win.
|
Originally Posted by Reverant
(Post 940271)
MTX-L for the win.
|
Originally Posted by hustler
(Post 940259)
I'm probably just getting an MTX-L since all these damn sensors are $80+ shipping.
dude no, you can get a replacement sensor for cheap as shit. want me to send you one to try? i have 2 spares. |
All times are GMT -4. The time now is 05:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands