Noob q about AFR's jumping around/smoothness...
I'm in Adaptronic land with an LC-1 and it just seems like my AFRs are lumpy... Is that the norm? Should I be looking for an issue somewhere? I'm still stock other than the Adap. and LC-1 (and muffler).
I would say my AFRs bounce back and forth +-0.4 with a few larger deviations here and there while idling or cruising steady state on the express-way. Hitting the hammer it seems smoother, but is still a little bumpy.
See attached... Thanks
-Todd
I would say my AFRs bounce back and forth +-0.4 with a few larger deviations here and there while idling or cruising steady state on the express-way. Hitting the hammer it seems smoother, but is still a little bumpy.
See attached... Thanks
-Todd
sounds normal to me. its not FLAWLESS unless you really get in there and perfect the crap out of the map in that region and even then it will bounce around ever so slightly.
why is this in this section and not the Adap section though?
why is this in this section and not the Adap section though?
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
Sep 30, 2015 02:44 PM






