Originally Posted by ThePass (Post 1286712)

Update on these, seems like nearly every one of these brackets that gets ordered is for a Reverent ECU and so needs the adapter dabs as well. As a result we ran out of stock on those tabs so a couple guys have been in a holding pattern waiting for us to finish more tabs.

Those are being finished this week so existing orders that need the Reverent tabs should ship beginning of next week, and future orders needing the tabs will be back to shipping immediately.

Originally Posted by ThePass (Post 1269080)

Less (projected) demand. The more complicated the solution needs to be, the more demand there will be for a well-designed solution that takes the guesswork out of the process for the customer and makes it a bolt-on affair. Of the three ECU locations, the 99+ is the worst/most difficult to mount an aftermarket unit, followed by the 90-93. The 94-97 location is much easier for a DIYer to mount an ECU in, by just screwing it into the rear bulkhead. I'm not saying that's a good way to do it, but because it can be done that way easily, less guys will opt to spend money on a dedicated bracket.

Originally Posted by ThePass (Post 1207771)

Finally some updates!

Reverent ECUs:

We've worked everything out for the Reverent Enhanced ECUs. Now when you order one of the ECU brackets through Good-Win Racing, just put a note during checkout that you need the tabs to fit the Reverent ECU and we'll throw them in the same box. No extra cost.

1999-2005 ECU Bracket:

It's here!
Built to fit your aftermarket ECU in the factory location under the dash of the NB miatas. Accommodates all the same ECUs as the 90-93 version; AEM, Megasquirt, MS3 Pro, Adaptronic.

Singular Motorsports Miata ECU Bracket for '99+ for Miata 1999-2005

Here it is, finished in our new "Chrome" powdercoat which is now standard;

https://www.miataturbo.net/attachmen...ine=1424389505

1990-1993 Bracket Updates:

The early-model brackets also come standard in our new powdercoat now:

Singular Motorsports Miata ECU Bracket for Miata 1990-1993

https://www.miataturbo.net/attachmen...ine=1424389505

PRICE Updates:

So we've added more features to the brackets... price needs to go up right? Nope!

We've been working to streamline the production process for these and keep our costs under our target. This has allowed us to DROP the price to $59 for both ECU models! The new pricing is live on Good-Win Racing.

-Ryan

Originally Posted by ridethecliche (Post 1397707)

Before I try to drill into it...

Are the NB brackets incompatible with the DIY MS3? I have a brain built unit and I don't think it fits. I mean, I don't think I'm that spatially challenged haha.

Originally Posted by ThePass (Post 1397712)

There are holes provided for the DIY PNP, MS3 Pro, Reverent built MS3, AEM EMS-4 and Adaptronic E440D, but that doesn't mean other ECUs are entirely incompatible. If your DIY MS3 has a different footprint and that's all that keeps it from bolting up then by all means, drill away!

Originally Posted by shuiend (Post 1397723)

I have the Singular bracket, but I have not tried fitting it with my MS3X. I might give it a try this weekend.

Originally Posted by ridethecliche (Post 1397746)

Handhold plz, im scurred!

The box is too wide to fit under the shelf as well.

Originally Posted by ThePass (Post 1397752)

That part of things is a bigger hurdle than the holes. If the ECU case is too tall to fit under the shelf of the bracket, that means it probably won't fit under the dash in the factory location - that shelf on the bracket pretty much butts up against other hard parts under the dash.

Originally Posted by ThePass (Post 1407019)

Woops, missed this, sorry. I can confirm that is not one of the ones we've confirmed ;)

Originally Posted by nazarite (Post 1533404)

Sorry for the thread resurrection, I did not see the MSPNP Gen 2 mentioned, will that fit this bracket? Thanks!

Originally Posted by ThePass (Post 1533406)

What are the LxWxH dimensions of your case?

Originally Posted by nazarite (Post 1533410)

It's this guy, don't have it on me so I'll have to wait until I get the car back.

https://www.diyautotune.com/product/...-manual-trans/

Originally Posted by topsu (Post 1533466)

On my -99 NB the ecu is mounted to passanger footwell, I think it is eu thing? Would the 90-93 work for me?

Originally Posted by L337TurboZ (Post 1621961)

Do y'all make a RHD variant of the ECU brackets? I purchased one for a 90-93 and it does work but the top hole doesn't like up at all.

With the kick plate installed over it the ECU is held firm. Just wish I had an option to reduce vibration.

Originally Posted by ThePass (Post 1621990)

Unfortunately we have no RHD cars here in the US to take measurements and see what would need to be tweaked. So, the brackets are intended for LHD but *might* work on RHD cars to some extent but we can't confirm. We wouldn't do a RHD specific version - too little demand - but I'd be happy to take a look at whether some additions or tweaks could be made to make the one version work better on RHD cars in addition to LHD. But for that I'd need someone with a RHD car to send us measurements etc. to even be able to take a look at what's possible.

Originally Posted by L337TurboZ (Post 1621993)

I can do that for you. I'm in South Carolina but I have a RHD car. I'll get pictures and measurements for you. The bracket worked at the bottom mounting holes but the top hole didn't work. It wouldn't take much to make a modification to what you're producing to make it compatible with both.

Originally Posted by ThePass (Post 1621997)

Shoot me an email with some pics and measurements, happy to take a look.
FAQ / Contact Us | Singular Motorsports