Singular Motorsports ECU Brackets
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
What are the LxWxH dimensions of your case?
Reply
0
0
Newb
Joined: Jun 2017
Posts: 14
Total Cats: 1
From: Roswell, GA
It's this guy, don't have it on me so I'll have to wait until I get the car back.
https://www.diyautotune.com/product/...-manual-trans/
https://www.diyautotune.com/product/...-manual-trans/
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
It's this guy, don't have it on me so I'll have to wait until I get the car back.
https://www.diyautotune.com/product/...-manual-trans/
https://www.diyautotune.com/product/...-manual-trans/
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
Not sure. Compare your footwell with pics of 90-93 footwell and ECU bracket to determine if you have the same mounting points as the 90-93.
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
Got an inquiry asking if the 99-05 ECU Bracket allows access to the options port on the MS3 Pro. Happened to have an MS3 Pro sitting here today.
Answer: yes! You have full access to every port on the ECU.
Answer: yes! You have full access to every port on the ECU.
Reply
0
0
Do y'all make a RHD variant of the ECU brackets? I purchased one for a 90-93 and it does work but the top hole doesn't like up at all.
With the kick plate installed over it the ECU is held firm. Just wish I had an option to reduce vibration.
With the kick plate installed over it the ECU is held firm. Just wish I had an option to reduce vibration.
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
Unfortunately we have no RHD cars here in the US to take measurements and see what would need to be tweaked. So, the brackets are intended for LHD but *might* work on RHD cars to some extent but we can't confirm. We wouldn't do a RHD specific version - too little demand - but I'd be happy to take a look at whether some additions or tweaks could be made to make the one version work better on RHD cars in addition to LHD. But for that I'd need someone with a RHD car to send us measurements etc. to even be able to take a look at what's possible.
Reply
0
0
Unfortunately we have no RHD cars here in the US to take measurements and see what would need to be tweaked. So, the brackets are intended for LHD but *might* work on RHD cars to some extent but we can't confirm. We wouldn't do a RHD specific version - too little demand - but I'd be happy to take a look at whether some additions or tweaks could be made to make the one version work better on RHD cars in addition to LHD. But for that I'd need someone with a RHD car to send us measurements etc. to even be able to take a look at what's possible.
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
I can do that for you. I'm in South Carolina but I have a RHD car. I'll get pictures and measurements for you. The bracket worked at the bottom mounting holes but the top hole didn't work. It wouldn't take much to make a modification to what you're producing to make it compatible with both.
FAQ / Contact Us | Singular Motorsports
Reply
0
0
Shoot me an email with some pics and measurements, happy to take a look.
FAQ / Contact Us | Singular Motorsports
FAQ / Contact Us | Singular Motorsports
Reply
1
1
Thread
Thread Starter
Forum
Replies
Last Post
BigEasy
Miata parts for sale/trade
3
Jan 22, 2019 07:37 PM
F20turbo
DIY Turbo Discussion
38
Mar 2, 2007 09:16 PM
