bp4w head on bpz3 bottom, what do I need? - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


Engine Performance This section is for discussion on all engine building related questions.
Sponsored by:
Sponsored by:

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 07-30-2015, 06:16 AM   #1
Junior Member
Thread Starter
iTrader: (1)
 
Sentic's Avatar
 
Join Date: Feb 2008
Location: Sweden
Posts: 435
Total Cats: 5
Default bp4w head on bpz3 bottom, what do I need?

As above.

Car is already running 6speed and that starter on a bp4w and is controlled by ms3.

Looking to build a block beside the car.

Are all the sensors interchangeable / fit with my current harness between the 2 blocks, or do I need to rebuild harness / ms / change sensors?

Is the bpz3 head gasket recommended or is a bp4w hg with reroute the way to go?

Thanks a lot!
Sentic is offline   Reply With Quote
Old 07-30-2015, 08:39 AM   #2
Senior Member
iTrader: (1)
 
Join Date: Apr 2011
Location: Columbia, SC
Posts: 1,342
Total Cats: 78
Default

<p>I'm about to run this exact setup. I am running the bp4w hg with a reroute, but I also already had the supplies for the reroute. It should all be the same.</p>
Schuyler is offline   Reply With Quote
Old 07-30-2015, 10:00 AM   #3
Murderator
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 36,198
Total Cats: 2,584
Default

same
18psi is offline   Reply With Quote
Old 07-30-2015, 10:32 AM   #4
Senior Member
 
Join Date: Sep 2013
Posts: 903
Total Cats: 59
Default

The 99-00 and 01-05 should all have the same sensors. I think that the cam sensor moved, so you might need to extend the harness. You'll need to run 2 wires to control the VVT solenoid, as well.
Dunning Kruger Affect is offline   Reply With Quote
Old 07-30-2015, 11:01 AM   #5
Senior Member
iTrader: (1)
 
Join Date: Apr 2011
Location: Columbia, SC
Posts: 1,342
Total Cats: 78
Default

<p>
Quote:
Originally Posted by Dunning Kruger Affect View Post
The 99-00 and 01-05 should all have the same sensors. I think that the cam sensor moved, so you might need to extend the harness. You'll need to run 2 wires to control the VVT solenoid, as well.
</p><p>He's running the bp4w head</p>
Schuyler is offline   Reply With Quote
Old 07-30-2015, 11:36 AM   #6
Senior Member
 
Join Date: Sep 2013
Posts: 903
Total Cats: 59
Default

The 99-00 and 01-05 should all have the same sensors. I think that the cam sensor moved, so you might need to shorten the harness. You'll need to tuck away the 2 wires that control the VVT solenoid, as well.
Dunning Kruger Affect is offline   Reply With Quote
Old 07-30-2015, 06:08 PM   #7
Supporting Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 14,370
Total Cats: 1,332
Default

The blocks are externally identical for your purposes
Savington is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 59 12-15-2017 09:00 PM
Another Cast Manifold Corky Bell Prefabbed Turbo Kits 18 11-22-2016 10:01 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
Bad head gasket or ? shooterschmidty Engine Performance 8 09-30-2015 11:28 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 12:45 AM.