Crankshaft Depot Ebay Rods
#1
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
Crankshaft Depot Ebay Rods
Call me crazy but im beginning to think that these are the same thing as Eagles, Scat, M-tuned.... for much less.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Thoughts?
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Thoughts?
#2
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
looks like a rod.
i would be interested in seeing some real tensile strength tests and molecular composition tests of it and a known "expensive" rod. I am skeptical that the Tiawan rods will hold up....
-you will need to balance these rods as 4 grams difference per rod is fairly large.
-the small end bore is 20.1mm... most pistons iirc are 20.0 (this alone would deter me from buying)
that being said i know of a few honda friends who run on china rods with no issues and make some legitimate horsepower.
i would be interested in seeing some real tensile strength tests and molecular composition tests of it and a known "expensive" rod. I am skeptical that the Tiawan rods will hold up....
-you will need to balance these rods as 4 grams difference per rod is fairly large.
-the small end bore is 20.1mm... most pistons iirc are 20.0 (this alone would deter me from buying)
that being said i know of a few honda friends who run on china rods with no issues and make some legitimate horsepower.
#3
With the exception of the hardware (which is still genuine ARP hardware btw, just not ARP 2000s) I can verify that they are the same. I've held both in my hands, side by side, and could not tell the difference (except for the logo).
I had them checked out by the director of engineering where I work and he commented on how nice they were.
I'll see if I can find the article that I was reading a while back on a nissan skyline forum. Basically - The guy ordered Eagle rods, and got shipped Tomei rods. He was like "******* BONUS!", but called the company anyway to figure out what the **** happened. The guy on the other end confirmed that Eagle, Scat, Tomei, and several other brands were all made and balanced in their factory and simply re-branded before they left.
TL;DR Exact same stuff.
EDIT: The set that I bought was balanced within 1 gram.
I had them checked out by the director of engineering where I work and he commented on how nice they were.
I'll see if I can find the article that I was reading a while back on a nissan skyline forum. Basically - The guy ordered Eagle rods, and got shipped Tomei rods. He was like "******* BONUS!", but called the company anyway to figure out what the **** happened. The guy on the other end confirmed that Eagle, Scat, Tomei, and several other brands were all made and balanced in their factory and simply re-branded before they left.
TL;DR Exact same stuff.
EDIT: The set that I bought was balanced within 1 gram.
#5
Found it.
http://www.gtr.co.uk/forum/74699-my-...agle-rods.html
Edit: Doesn't look like there was a phone call, I was mistaken.
http://www.gtr.co.uk/forum/74699-my-...agle-rods.html
Edit: Doesn't look like there was a phone call, I was mistaken.
#15
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
Call me crazy but im beginning to think that these are the same thing as Eagles, Scat, M-tuned.... for much less.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Thoughts?
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Thoughts?
Support your vendors plz.
#16
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
I do support them Sav but at the same time if the deals there, im sorry but im going for the deal. I made a best offer of 190. If he sells them for 200+16 shipping then its 216 and they already come with ARP ARP8740 3/8" cap screw bolts. So yeah, thats a savings.
M-tuned right now has them for $320 shipped in the USA so thats a 100 bucks that can go towards my bearings. I have nothing against M-tuned. Great company and sales people but a 100 bucks less is a 100 bucks less period.
M-tuned right now has them for $320 shipped in the USA so thats a 100 bucks that can go towards my bearings. I have nothing against M-tuned. Great company and sales people but a 100 bucks less is a 100 bucks less period.
#18
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
I weighed my set on our lab's precision balance and the set of 4 had a spread of about 0.6 grams. Two of them were within 0.01g, then one was a tad higher and one a tad lower. Actually I think my M-tuned rods were slightly more closely weight-matched than my set of Supertech pistons, which were also all within a gram of each other.
#19
This debate is a sticky one, yes we should support our vendors and such. But to be honest it will fall completely on what the consumer as a individual wants, if they want cheap they will go cheap, if they want reassurance of quality they would go with a vendor. All the vendors can do to out weigh the competition is to give us the reassurance that what we are buying in terms of quality is far superior to the knock off competition. But when vendors start slacking (not saying anyone is, im saying hypothetically) that's where the problem starts, and **** starts hitting fans.
To me as a person i feel good inside when i buy from a vendor because i know my moneys going to someone that matters to this community. I will admit i have in the past gone cheap, and it certainly wont be the last time. But the thing to know is to buy quality where it counts.
To me as a person i feel good inside when i buy from a vendor because i know my moneys going to someone that matters to this community. I will admit i have in the past gone cheap, and it certainly wont be the last time. But the thing to know is to buy quality where it counts.
#20
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
Considering the fact that i blew an assload of money on all the quality stuff i did on my last motor only to have it go to nothing makes me not want to go that route again. Ive already changed builders so why not adjust the parts layout? Im not spending 700 on rods again.