Crossflow Radiator (949racing)

Reply Subscribe

Thread Tools

Search this Thread

05-07-2020, 06:08 PM

chr

Newb

Thread Starter

Join Date: Apr 2020

Posts: 28

Total Cats: -2

Crossflow Radiator (949racing)

If I were to install the crossflow radiator with stock fans will there be enough clearance? Will the stock fans be enough to pull through the crossflow?

05-07-2020, 06:16 PM

dleavitt

Senior Member

iTrader: (1)

Join Date: May 2015

Location: Salem, OR

Posts: 757

Total Cats: 223

I have the SPM Crossflow, and I think there was some trimming needed but nothing major. I have one stock fan on the driver's side, and the big tubular Racing Beat swaybar.

05-07-2020, 06:19 PM

Romba

Junior Member

Join Date: Oct 2017

Posts: 78

Total Cats: 4

Stock fans fit fine on my stock NA6 with the crossflow, other than trimming a corner or two of the fans to fit the filler neck of the radiator. The fan debate is an eternal question on this forum, but people seem to think the stock fans are sufficient for most applications.

05-07-2020, 07:12 PM

turbofan

Supporting Vendor

iTrader: (1)

Join Date: Sep 2010

Location: Lake Forest, CA

Posts: 7,956

Total Cats: 1,008

The Supermiata crossflow is designed to use stock fans. Minor trimming is needed to clear the inlet/outlet, guidance is provided in the instructions.

Vegas has a single OEM fan, so yes, plenty to pull through our crossflow.

__________________
Ed@949Racing/Supermiata
www.949racing.com
www.supermiata.com