QMax Coolant Reroute

Reply Subscribe

Thread Tools

Search this Thread

Apr 10, 2020 | 08:29 PM

chr

Thread Starter

Newb

Joined: Apr 2020

Posts: 28

Total Cats: -2

QMax Coolant Reroute

For the people with the QMax reroute did you have to modify the EGR tube or have to remove it?

Apr 10, 2020 | 10:22 PM

mjcanton

Junior Member

Joined: Jun 2018

Posts: 55

Total Cats: 4

From: Maple Grove, MN

It's super close, but it fits. You don't have to remove it. I think you might have to disconnect it to install it, I can't remember.

Apr 11, 2020 | 12:30 AM

chr

Thread Starter

Newb

Joined: Apr 2020

Posts: 28

Total Cats: -2

Did you have to tweak the EGR at all or just disconnect it.

Apr 12, 2020 | 01:52 PM

miataki

Junior Member

Joined: Aug 2015

Posts: 82

Total Cats: 5

I didnt have to touch my EGR tube originally to install but I went ahead and removed it, welded it shut anyway.

Apr 12, 2020 | 09:41 PM

MartinezA92

Elite Member

iTrader: (4)

Joined: Aug 2009

Posts: 1,784

Total Cats: 42

From: Redwood City, CA

I had to tweak mine.

Apr 13, 2020 | 11:21 AM

turbofan

Supporting Vendor

iTrader: (1)

Joined: Sep 2010

Posts: 8,146

Total Cats: 1,087

From: Lake Forest, CA

Mazda wasn't exactly precise with their manufacturing of the EGR tubes. On some cars it fits without modification, on others it requires tweaking.

__________________
Ed@949Racing/Supermiata
www.949racing.com

Apr 13, 2020 | 05:09 PM

scottns

Junior Member

iTrader: (1)

Joined: Oct 2013

Posts: 145

Total Cats: 9

From: Central MA

On my NA its very close but I did not have to tweak it at all. I did loosen it up while installing the re-route hosing though to give me more room while installing (just let it hang there).

Sep 2, 2020 | 05:21 AM

Only1Balto

Newb

Joined: Apr 2019

Posts: 24

Total Cats: 2

Per their instructions, I got a small piece of wood and used a hammer to "manipulate" the EGR pipe a little lower. After that, it cleared perfectly.

Sep 2, 2020 | 01:20 PM

emilio700

Supporting Vendor

iTrader: (3)

Joined: May 2005

Posts: 7,622

Total Cats: 2,619

Quote:

Originally Posted by Only1Balto

Per their instructions, I got a small piece of wood and used a hammer to "manipulate" the EGR pipe a little lower. After that, it cleared perfectly.

You shouldn't have to tweak the EGR tube on any kits shipped after April 2019. A bit more clearance on main housing. Just loosen fittings a bit so pipe will "jiggle" a bit. Install Qmax then retighten EGR.

__________________

www.facebook.com/SuperMiata

949RACING.COM Home of the 6UL wheel
.33 SNR

Sep 2, 2020 | 05:23 PM

#10

L4nthonyl

Junior Member

iTrader: (3)

Joined: Oct 2013

Posts: 182

Total Cats: 4

From: SoCal

I removed the EGR and during the re-installation I slightly pressed down on EGR while tightening it. It's close but it clears even with some insulation.