Radiator choices?
#1
Radiator choices?
I am looking to get rid of the stock radiator to clear room for my IC. I was thinking about the honda half core one. I'm stuck between an ebay 3 core 3 Row Core Aluminum Radiator 12" Black Cooling Fan 92 00 Honda Civic EG Integra | eBay vs mishimoto duo core Mishimoto Aluminum Half Core Radiator 92 00 Civic D15 D16 B16 Honda Turbo Vtec | eBay
#5
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
The standard track tested method is IC in front. You have a lot more reading to do. This thread should answer what you need: https://www.miataturbo.net/race-prep...-thread-79930/
#14
Elite Member
iTrader: (15)
Join Date: Jan 2007
Location: Murfreesboro,TN
Posts: 2,045
Total Cats: 265
I'm not knocking Eric's car, because its well built, but being an auto-x car that only sees load for 60 seconds at a time for 3-8 runs a day, you can get away with a smaller cooling system.
#16
I believe solo I after nats was as close to tracking as its gotten. But some people have the opinion that prosolo is more demanding of the cooling system than tracking the car. Since you are ***** to the walls for 30-60 seconds, then sit in stop can go traffic for a couple minutes, and do it again. I'm not so sure. I personally have trouble keeping the auto-x car cool in weather over 85*F with the ebay manifold but it doesnt get hot until being back in grid for a couple minutes. IMO on a mazda B motor I wouldnt try running a half width rad on a track car, I just dont see it working.
#17
Senior Member
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
Inaccurate statement is inaccurate.
Not only will they work. They will work well. You can talk about "autoX" all you want....but during a several hour long, steady state tuning session, it never even got got warm enough to have to take a break. If it's not going to get hot on the dyno....it's not going to get hot.
With two drivers at a the Pro Finale with a "pod" of only 4 pairs (read Hot Lapping) in weather over 100 degrees, the car never got over 206 degrees.
Not only will they work. They will work well. You can talk about "autoX" all you want....but during a several hour long, steady state tuning session, it never even got got warm enough to have to take a break. If it's not going to get hot on the dyno....it's not going to get hot.
With two drivers at a the Pro Finale with a "pod" of only 4 pairs (read Hot Lapping) in weather over 100 degrees, the car never got over 206 degrees.
#18
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Inaccurate statement is inaccurate.
Not only will they work. They will work well. You can talk about "autoX" all you want....but during a several hour long, steady state tuning session, it never even got got warm enough to have to take a break. If it's not going to get hot on the dyno....it's not going to get hot.
With two drivers at a the Pro Finale with a "pod" of only 4 pairs (read Hot Lapping) in weather over 100 degrees, the car never got over 206 degrees.
Not only will they work. They will work well. You can talk about "autoX" all you want....but during a several hour long, steady state tuning session, it never even got got warm enough to have to take a break. If it's not going to get hot on the dyno....it's not going to get hot.
With two drivers at a the Pro Finale with a "pod" of only 4 pairs (read Hot Lapping) in weather over 100 degrees, the car never got over 206 degrees.
#19
Senior Member
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
And my car is higher compression (read: more heat), higher boost (read: more heat) and higher power(you guessed it...more heat) than 99% of the cars on this site.
At the end of the day you need a well designed cooling system built with quality parts. What works on my car may or may not work on yours. your results may vary.
At the end of the day you need a well designed cooling system built with quality parts. What works on my car may or may not work on yours. your results may vary.