recommend me a new turbo
#1
recommend me a new turbo
so... during the last race of the season one of the uprated steel bearing cages in the Garrett GT2871r (60a/r compressor & 64a/r turbine) shattered. parts went through the whole engine causing extensive damage but that's another story. was making 355bhp
looking at replacing the turbo but we will be going for more power. looking for around 400bhp+. we would like to keep the fm manifold so in need to be something that will fit but a new exhaust will be made so that side is not important.
so what do you guys recommend? this is a race car and only ever sees track use.
looking at replacing the turbo but we will be going for more power. looking for around 400bhp+. we would like to keep the fm manifold so in need to be something that will fit but a new exhaust will be made so that side is not important.
so what do you guys recommend? this is a race car and only ever sees track use.
Last edited by mr2daj; 11-11-2012 at 04:19 PM.
#2
you should be able to get 400whp with that turbo. That turbo is going to be the best t2 internally gated turbo on the market. You could go .86 ar but that will be super laggy. I have seen guys make like 418whp with the 2871r .64
If you are willing to ditch the mani id go gt3071r externally gated t3. External wg and t3 flange is just a much better setup overall.
If you are willing to ditch the mani id go gt3071r externally gated t3. External wg and t3 flange is just a much better setup overall.
#3
I've got a street car, but same turbo, similar power goals, and similar "I hate to ditch the T25 manifold that's been good to me so far" mentality.
I bought a .86ar exhaust housing to upgrade to, and I keep looking at the GTX2867, but I'm just not convinced it's worth dropping the money on. Are there really any other T25 options out there? Subscribed.
I bought a .86ar exhaust housing to upgrade to, and I keep looking at the GTX2867, but I'm just not convinced it's worth dropping the money on. Are there really any other T25 options out there? Subscribed.
#4
you should be able to get 400whp with that turbo. That turbo is going to be the best t2 internally gated turbo on the market. You could go .86 ar but that will be super laggy. I have seen guys make like 418whp with the 2871r .64
If you are willing to ditch the mani id go gt3071r externally gated t3. External wg and t3 flange is just a much better setup overall.
If you are willing to ditch the mani id go gt3071r externally gated t3. External wg and t3 flange is just a much better setup overall.
A T3 flange would definitely option the options up significantly.
#5
EFR6758 like Soviet? 400whp, and Soviet had no headwork/stock IM and everything. Should be able to squeeze a bit more power out of it.
I know you don't care as much about spool on the track, but it seems silly to go with anything else, those EFRs are really that much better than everything else.
I know you don't care as much about spool on the track, but it seems silly to go with anything else, those EFRs are really that much better than everything else.
#7
pleased the efr 6758 was mentioned as this is what i was looking at. think i will have a search on here to see if i can find some reviews.
i realise the turbo i had was capable of my power goals but now i have the opportunity for change why not try to find someone better.. as far as i can tell all Garrett turbos are made in china and the quality will surely suffer. i may be wrong and to be honest have not looked far.
i realise the turbo i had was capable of my power goals but now i have the opportunity for change why not try to find someone better.. as far as i can tell all Garrett turbos are made in china and the quality will surely suffer. i may be wrong and to be honest have not looked far.
#8
Read the last half of Soviet's build thread, that's the only review you should need.
It will convince you the EFR 6758 is what you want/need. Made in the USA
Also, 949 Racing and Savington are putting EFR's in their stoopid fast race cars, replacing Garrett turbos. That should also help convince you.
Oh, and Indy cars and ALMS cars use the exact same turbos. That should help convince you too...
It will convince you the EFR 6758 is what you want/need. Made in the USA
Also, 949 Racing and Savington are putting EFR's in their stoopid fast race cars, replacing Garrett turbos. That should also help convince you.
Oh, and Indy cars and ALMS cars use the exact same turbos. That should help convince you too...
#14
so where is the best place to supply one? been trying to get some prices. seem to be around £1000 ($1600) over here plus tax. there must be a better supplier on your side of the pond.
after a little reading i now really want one!! should make 400bhp easily on our engine without running silly boost.
after a little reading i now really want one!! should make 400bhp easily on our engine without running silly boost.
#17
so where is the best place to supply one? been trying to get some prices. seem to be around £1000 ($1600) over here plus tax. there must be a better supplier on your side of the pond.
after a little reading i now really want one!! should make 400bhp easily on our engine without running silly boost.
after a little reading i now really want one!! should make 400bhp easily on our engine without running silly boost.
Also, I dont think I've seen the 6255 for sale anywhere and even if it was I would think you'd be able to cross the surge line with it on a 1.8