When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
+1 I just ordered some Mazda seals and the front crank/cam seals looked like the exact same seal as the one I pulled off my '91. Either new old stock, they're still making the same ones 26+ years later or it's been replaced before, not sure.
Someone correct me if I'm wrong, but I believe that the exhaust cam seal (FS05-10-602A) and the front crank seal (B3C7-10-602A) are the same seal even though they have different part numbers. You can see in the mazda diagrams below that both front crank seal and exhaust cam seal are labeled 10-602A.
Can the blind cover metal gasket (ZL09-10-607) bolted to the nose of the VVT with the 3 torx screws be reused? I'm fighting an oil leak somewhere around the timing belt, and I have reused the gasket at lead once.