Long story short it all hapened after an attempt to retune my car and ever since white smoke escaping from exhaust and catch can, oil escaping from oil cap, and ran 2 quarters of oil in one week.
just wondering cz it was running straight until i decided to make it better ( overheating accures too after half an hour of highway after the attempt of retuning

 

Oil was black when i changed it 2 days ago

 

What had you changed

 

Nothing but uploading a base map! After i uploaded it car wouldnt start timing was messed up i fixed the timing but car ran horrible for a week and wouldnt shut on if the temperature was over 200

 

Nothing but uploading a base map! After i uploaded it car wouldnt start timing was messed up i fixed the timing but car ran horrible for a week and wouldnt shut on if the temperature was over 200. Took it to a tuner wednesday he tuned it a little bit and he told me it could be headgasket or seals

 

If by shut "on" you mean shut down.......really sounds like your timing was way outta wack and you had things glowing in the combustion chamber so the engine was "dieseling" after you turned the key off. It's toast....you probably melted the ring lands off the pistons.

 

I was only running 10 psi but rebuilding the engine it is i guess

 

I had my afr at 11.5 at 10 psi and was running supper fine until the retuning attempt

 

Base map probably fucked it up cz the tuner had to reevent all the timing and fueling table

 

What base map did you get? I am running the timing map from Diy and it works great.

 

crazy question but if it was running fine why would you start over tuning?

 

i got it from megasquirtpnp

 

I wanted to try a different tune by i deleted ghe old one by mistake

 

Had good tune

Loaded basemap without understanding what changes were being made

Blew up motor in a week