UEGO Sensor condition
Is there any way to determine if a UEGO sense (controlled by an AEM controller) is reading too high, or too low? I feel like my 14.7 is not truly 14.7AFR, and that my car is running richer than it should.
My tune is pretty spot on, but I still can't get past like 18 MPG highway. I go to school about 40 miles away from home, and using ~4 gallons for a roundtrip shouldn't be happening.
Albeit I'm in boost sometimes, but most of the time I'm cruising in vacuum going around the speed limit on the highway.
My WBO2 sensor was exposed to some pretty violent flames because my ignition was 180* off (engine wouldn't start, but loud banging did occur. Base tune for my ECU had the pins reversed for ignition). Thoughts?
My tune is pretty spot on, but I still can't get past like 18 MPG highway. I go to school about 40 miles away from home, and using ~4 gallons for a roundtrip shouldn't be happening.
Albeit I'm in boost sometimes, but most of the time I'm cruising in vacuum going around the speed limit on the highway.
My WBO2 sensor was exposed to some pretty violent flames because my ignition was 180* off (engine wouldn't start, but loud banging did occur. Base tune for my ECU had the pins reversed for ignition). Thoughts?
nope. they calibrate it once before packaging it -- if it degrades there's really no way of knowing unless you use something else to reference.
what are your cruise AFRs and spark advance?
what are your cruise AFRs and spark advance?
Tune attached...can't attach the RusEFI ini for whatever reason. http://rusefi.com/build_server/rusefi_bundle.zip
Last edited by ByteVenom; Oct 6, 2017 at 12:41 PM.







