Miata Turbo Forum - Boost cars, acquire cats.
My old Greddy Miata lives on! I used the 8:1 disk Vortech FMU from it to squeeze a few more drops of fuel.
My old Greddy Miata lives on! I used the 8:1 disk Vortech FMU from it to squeeze a few more drops of fuel.
0 2014/03/29 03:31:53
TRUBO! To make Miata choo-choo! Stock MSM down pipe with MSM Cat.
TRUBO! To make Miata choo-choo! Stock MSM down pipe with MSM Cat.
0 2014/03/29 03:31:53
My turbo setup in that giant box plus I had to pick up groceries to keep my wife happy.
My turbo setup in that giant box plus I had to pick up groceries to keep my wife happy.
0 2014/03/29 03:31:53
Sandwich plate installed. I had conniptions when I discovered that 95' Miatas did not have a oil source on the block. I saw that it was blocked off from factory. I shed a tear that day and bought the sandwich adapter (M20x1.5mm fittings) with a stainless steel oil feed that mated to a MSM oil feed (M10x1.5mm fitting) The stock MSM oil feed line should have gone directly into the block (but it's nonexistent)
Sandwich plate installed. I had conniptions when I discovered that 95' Miatas did not have a oil source on the block. I saw that it was blocked off from factory. I shed a tear that day and bought the sandwich adapter (M20x1.5mm fittings) with a stainless steel oil feed that mated to a MSM oil feed (M10x1.5mm fitting) The stock MSM oil feed line should have gone directly into the block (but it's nonexistent)
0 2014/03/29 03:24:15
Tight fitment. I retained PS/AC and factory cruise control boo-yah!
Tight fitment. I retained PS/AC and factory cruise control boo-yah!
0 2014/03/29 03:24:15
My efficient JDM slanted intercooler style.
My efficient JDM slanted intercooler style.
0 2014/03/29 03:24:15
Ready to be hacked up.
Ready to be hacked up.
0 2014/03/29 03:22:12
Oil return all hooked up.
Oil return all hooked up.
0 2014/03/29 03:22:12
Oil return drill and tap kit with some good ole JB weld.
Oil return drill and tap kit with some good ole JB weld.
0 2014/03/29 03:16:39
Oil pan tapped for my oil return. I decided against using the MSM oil pan because it's a greater pain in the ass than just tapping the stock oil pan. I know I cut corners but I gave myself 3 days to do all this and it's my daily driver. (I realize after it's all said and done how incredibly stupid I still am. I am not proud of this at all)
Oil pan tapped for my oil return. I decided against using the MSM oil pan because it's a greater pain in the ass than just tapping the stock oil pan. I know I cut corners but I gave myself 3 days to do all this and it's my daily driver. (I realize after it's all said and done how incredibly stupid I still am. I am not proud of this at all)
0 2014/03/29 03:16:39
I love this angle.
I love this angle.
0 2014/03/29 03:16:39
My bedroom. My wife let me use it for this purpose because we don't have a garage.
My bedroom. My wife let me use it for this purpose because we don't have a garage.
0 2014/03/29 03:12:48
My Miata from the rear. Zoom-Zoom.
My Miata from the rear. Zoom-Zoom.
0 2014/03/29 03:12:48
Mock fitment. OMG, it doesn't fit well. The compressor inlet interferes with the stock waterpump inlet neck.
Mock fitment. OMG, it doesn't fit well. The compressor inlet interferes with the stock waterpump inlet neck.
0 2014/03/29 03:12:48
MSM injectors seated snuggly.
MSM injectors seated snuggly.
0 2014/03/29 03:08:18
Close-up of my jerry rigged tap tool. See the blue things? They are holding the tap in place so I can use the only drill I own.
Close-up of my jerry rigged tap tool. See the blue things? They are holding the tap in place so I can use the only drill I own.
0 2014/03/29 03:08:18
My 95' Laguna Blue baby. With the top down I can carry infinite amount of boxes. (I had made this argument with my wife and proved to her that it can be practical)
My 95' Laguna Blue baby. With the top down I can carry infinite amount of boxes. (I had made this argument with my wife and proved to her that it can be practical)
0 2014/03/29 03:08:18
Injectors comparison (The MSM setup came with the injectors, so why not?)
Injectors comparison (The MSM setup came with the injectors, so why not?)
0 2014/03/29 03:03:34
Ugly stock header wants to be removed. (I almost stripped a bolt in the process even with dangerous amounts of nut buster)
Ugly stock header wants to be removed. (I almost stripped a bolt in the process even with dangerous amounts of nut buster)
0 2014/03/29 03:03:34
Stock header out with some coaxing.
Stock header out with some coaxing.
0 2014/03/29 03:03:34
EGR delete kit ordered.
EGR delete kit ordered.
0 2014/03/29 02:59:47
It's hard to take pictures and hack off the coolant feed at the same time, like I said, require ambidextrous hands.
It's hard to take pictures and hack off the coolant feed at the same time, like I said, require ambidextrous hands.
0 2014/03/29 02:59:47
My jerry-rigged drill and tap (I didn't have the right size drill)
My jerry-rigged drill and tap (I didn't have the right size drill)
0 2014/03/29 02:59:47
EGR delete done with block off plates (ordered from BEGI)
EGR delete done with block off plates (ordered from BEGI)
0 2014/03/29 02:57:20
EGR components removed.
EGR components removed.
0 2014/03/29 02:57:20
cut off the end connectors from coolant return/feed and oil return.
cut off the end connectors from coolant return/feed and oil return.
0 2014/03/29 02:57:20
Waterpump inlet redirected in order to not interfere with compressor inlet
Waterpump inlet redirected in order to not interfere with compressor inlet
0 2014/03/29 02:50:37
Reuse the hard coolant pipe that goes to the lower radiator hose.
Reuse the hard coolant pipe that goes to the lower radiator hose.
0 2014/03/29 02:50:37
Waterpump inlet neck hacked off with angle grinder, be careful not to cut the pipe underneath it. Requires some finesse.
Waterpump inlet neck hacked off with angle grinder, be careful not to cut the pipe underneath it. Requires some finesse.
0 2014/03/29 02:50:37
Turbo install completed :-)
Turbo install completed :-)
0 2014/03/29 02:48:44
coolant lines to and from turbo
coolant lines to and from turbo
0 2014/03/29 02:48:44
coolant line cut
coolant line cut
0 2014/03/29 02:48:44
comparison stock injectors vs MSM injectors
comparison stock injectors vs MSM injectors
0 2014/03/29 02:46:39
almost complete
almost complete
0 2014/03/29 02:46:39