Miata Turbo Forum - Boost cars, acquire cats.
0 2016/02/16 23:06:17
0 2016/02/09 09:33:18
0 2016/02/09 09:28:24
0 2016/02/09 09:15:32
I beat the transmission tunnel senseless. This is about half way. I really wanted to be perfectly centered to the wheel, which means the seat need to be pretty far to the middle of the car.
I beat the transmission tunnel senseless. This is about half way. I really wanted to be perfectly centered to the wheel, which means the seat need to be pretty far to the middle of the car.
0 2016/02/07 09:34:22
Used a make-shift plumb bob to get the seat centered.
Used a make-shift plumb bob to get the seat centered.
0 2016/02/07 09:34:11
I had to heat them up super hot with a blowtorch in order to bend them, so I think they will be strong enough.
I had to heat them up super hot with a blowtorch in order to bend them, so I think they will be strong enough.
0 2016/02/07 09:34:07
steel tabs.
steel tabs.
0 2016/02/07 09:34:02
I accidentally went through in one spot
I accidentally went through in one spot
0 2016/02/07 09:29:57
0 2016/01/23 16:59:34
0 2016/01/23 16:56:53
0 2016/01/23 16:52:58
0 2016/01/12 08:42:51
0 2016/01/06 08:52:52
0 2016/01/06 08:22:32
0 2016/01/05 21:28:01
0 2016/01/05 21:27:51
0 2016/01/05 21:27:43
0 2016/01/05 21:24:33
0 2016/01/05 21:23:30
0 2016/01/05 21:15:37
0 2016/01/05 10:13:51
0 2016/01/04 09:32:08
0 2015/12/30 23:00:41
0 2015/12/19 14:26:56
0 2015/12/19 14:26:42
0 2015/12/16 22:31:19
0 2015/12/14 12:31:49
Plus some flat stock. Mounts to where the power steering lines were. I moved those up and out of the way. I also triangulated the bottom to some random bolt underneath to stabilize it.
Plus some flat stock. Mounts to where the power steering lines were. I moved those up and out of the way. I also triangulated the bottom to some random bolt underneath to stabilize it.
0 2015/12/13 19:47:50
Used some angle stock aluminum for a bracket, with cutaways so it could sit as low as possible.
Used some angle stock aluminum for a bracket, with cutaways so it could sit as low as possible.
0 2015/12/13 19:47:42
up and in.
up and in.
0 2015/12/13 19:47:23
I went around the side of the radiator and under the sway bar.
I went around the side of the radiator and under the sway bar.
0 2015/12/13 19:47:13
Intercooler goes there.
Intercooler goes there.
0 2015/12/13 19:46:58
Through the hole behind the headlight, which I enlarged and trimmed with plastic.
Through the hole behind the headlight, which I enlarged and trimmed with plastic.
0 2015/12/13 19:46:35
Turbo goes on that end. Coming soon! For now I removed the last piece, threw a shorter one on and slapped a cone filter on the end of it.
Turbo goes on that end. Coming soon! For now I removed the last piece, threw a shorter one on and slapped a cone filter on the end of it.
0 2015/12/13 19:46:22
0 2015/12/12 14:18:41
0 2015/12/07 20:19:42
0 2015/11/08 18:21:05
0 2015/11/08 18:19:55
0 2015/11/06 15:36:47