Miata Turbo Forum - Boost cars, acquire cats.
0 2017/09/02 18:39:16
Let the fun begin!
Let the fun begin!
0 2017/09/02 18:44:27
Ok. Fun's over. I've got 3 exhaust manifold nuts that just say no. Too tight for a box end. Open end wrench just speads. Can't fit in a nut splitter. I wonder if ey make a 14mm brake line wrench?
Ok. Fun's over. I've got 3 exhaust manifold nuts that just say no. Too tight for a box end. Open end wrench just speads. Can't fit in a nut splitter. I wonder if ey make a 14mm brake line wrench?
0 2017/09/02 18:57:58
Ok. Fun's over. I've got 3 exhaust manifold nuts that just say no. Too tight for a box end. Tge open end wrench just spreads. I wonder if anyone makes a 14mm brake line wrench? I'll put it to bed with some PB blaster and check it out tommorro.
Ok. Fun's over. I've got 3 exhaust manifold nuts that just say no. Too tight for a box end. Tge open end wrench just spreads. I wonder if anyone makes a 14mm brake line wrench? I'll put it to bed with some PB blaster and check it out tommorro.
0 2017/09/02 19:03:51
Heat, 14mm brake line wrench and my best framing hammer are no match... I'm thinkin' sawsall!
Heat, 14mm brake line wrench and my best framing hammer are no match... I'm thinkin' sawsall!
0 2017/09/03 13:21:06
A fine solution to this problem would be if the kit manufacturer supplied 1/4" shorter manifold bolts for the center 3 locations... Then you could get a decent wrench on them. I'll call and suggest that. Josh, I've got inconel + high temp theadlock on the tubo to manifold flange. Is it also recommended for the head to manifold flange?
A fine solution to this problem would be if the kit manufacturer supplied 1/4" shorter manifold bolts for the center 3 locations... Then you could get a decent wrench on them. I'll call and suggest that. Josh, I've got inconel + high temp theadlock on the tubo to manifold flange. Is it also recommended for the head to manifold flange?
0 2017/09/03 13:39:44
OEM mazdaspeed decks out at -.005
OEM mazdaspeed decks out at -.005
0 2017/09/15 11:54:57
JE decks out at -.020.
JE decks out at -.020.
0 2017/09/15 11:55:48
0 2017/10/27 12:21:17
0 2017/11/20 09:08:32
0 2017/11/20 09:09:30
0 2017/11/20 09:10:19
0 2017/11/27 08:30:45
While I couldn't find actual "baling wire" the hose clamps made an awesomely ghetto fix.
While I couldn't find actual "baling wire" the hose clamps made an awesomely ghetto fix.
0 2018/08/20 07:39:34
While I couldn't find actual "baling wire", I did daisy chain a couple of hose clamps together for an awesomely ghetto fix!
While I couldn't find actual "baling wire", I did daisy chain a couple of hose clamps together for an awesomely ghetto fix!
0 2018/08/20 07:49:03
0 2018/08/20 07:50:57
0 2019/04/03 16:08:07