Miata Turbo Forum - Boost cars, acquire cats.
0 2019/02/08 11:11:02
0 2019/02/08 11:11:00
0 2019/02/08 11:10:58
0 2019/02/08 11:10:56
0 2019/02/08 11:10:54
0 2019/02/07 14:42:06
0 2019/02/07 14:41:47
0 2019/02/07 14:41:27
0 2019/02/07 14:41:06
0 2019/02/07 14:40:43
0 2019/02/07 14:40:24
The new rheostat uses the same Ohm rating as standard GM gauges, and the fuel gauge could emulate the needed Ohm rating by setting the dip switches.
The new rheostat uses the same Ohm rating as standard GM gauges, and the fuel gauge could emulate the needed Ohm rating by setting the dip switches.
0 2018/06/06 22:05:16
Fully raised, the Ohm rating of the rheostat is within 3 Ohms of what's needed to show a full tank
Fully raised, the Ohm rating of the rheostat is within 3 Ohms of what's needed to show a full tank
0 2018/06/06 22:05:15
The mechanical installation was clean and simple. It's also a simple two-wire hook-up
The mechanical installation was clean and simple. It's also a simple two-wire hook-up
0 2018/06/06 22:05:15
The float arm was cut so that the float landed in the same place as the OEM float when empty.
The float arm was cut so that the float landed in the same place as the OEM float when empty.
0 2018/06/06 22:05:14
This rheostat replaces the OEM unit. It was easy to mechanically mount and wire.
This rheostat replaces the OEM unit. It was easy to mechanically mount and wire.
0 2018/06/06 22:00:22
When raised all the way up, it was within 2-3 Ohms of what was needed to show "full".
When raised all the way up, it was within 2-3 Ohms of what was needed to show "full".
0 2018/06/06 22:00:21
The float rotates from the same location as stock.
The float rotates from the same location as stock.
0 2018/06/06 22:00:21
The length of the lever was shortened so that the float landed at the same place and height as the stock float.
The length of the lever was shortened so that the float landed at the same place and height as the stock float.
0 2018/06/06 22:00:20
Ball Joint beauty shot?
Ball Joint beauty shot?
0 2018/01/19 09:23:09
Extended ball joints mean more negative camber. They also mean quicker turn in and more suspension tuning options.
Extended ball joints mean more negative camber. They also mean quicker turn in and more suspension tuning options.
0 2018/01/19 09:23:08
Is there such a thing as ball joint beauty shots?
Is there such a thing as ball joint beauty shots?
0 2018/01/19 09:19:06
Extended means more negative camber. Negative camber means quicker turn in and more suspension tuning options.
Extended means more negative camber. Negative camber means quicker turn in and more suspension tuning options.
0 2018/01/19 09:19:01
0 2018/01/03 10:09:22
Bumper & bracket installed.
Bumper & bracket installed.
0 2017/09/16 14:46:33
Support bars tie into the rear subassembly.
Support bars tie into the rear subassembly.
0 2017/09/16 14:46:32
The goal is a good street/track setup.
The goal is a good street/track setup.
0 2017/09/15 21:24:52
Test fit with APR end plates
Test fit with APR end plates
0 2017/09/15 21:24:49
12 degrees
12 degrees
0 2017/09/15 21:24:21
Zero degrees
Zero degrees
0 2017/09/15 21:24:14
Raw aluminum will be replaced with powder coated satin black shortly.
Raw aluminum will be replaced with powder coated satin black shortly.
0 2017/09/15 21:23:57
This setup gives zero to 12 degrees of adjustment in 2 degree increments. This is good for first tests.
This setup gives zero to 12 degrees of adjustment in 2 degree increments. This is good for first tests.
0 2017/09/15 21:23:53
Aluminum spars with internal carbon fiber reinforcements.
Aluminum spars with internal carbon fiber reinforcements.
0 2017/09/15 21:23:46
These pictures show the new under-wing configuration and the CFR side panels
These pictures show the new under-wing configuration and the CFR side panels
0 2017/09/15 21:23:39
Tested via CAD first
Tested via CAD first
0 2017/09/15 21:23:28
0 2017/08/28 08:24:34
0 2017/08/28 08:24:29
0 2017/08/28 08:24:23
Hot water from the back of the block flows down to the radiator.
Hot water from the back of the block flows down to the radiator.
0 2017/07/28 01:31:34
The Swirl Pot is the highest point of the engine. It's where air bubbles go to die.
The Swirl Pot is the highest point of the engine. It's where air bubbles go to die.
0 2017/07/28 01:27:06