Miata Turbo Forum - Boost cars, acquire cats.
...along with the crank
...along with the crank
0 2017/04/14 12:38:12
I mixed & matched the ebay rods, Supertech pistons and Wiseco rings gor a maximum overall weight difference of 0.5 g
I mixed & matched the ebay rods, Supertech pistons and Wiseco rings gor a maximum overall weight difference of 0.5 g
0 2017/04/14 12:37:33
0 2017/04/14 12:26:16
0 2017/04/14 12:26:05
0 2017/04/14 12:25:52
0 2017/04/14 12:12:32
0 2017/04/02 08:00:55
ready to play
ready to play
0 2017/03/18 13:19:21
100% sealed
100% sealed
0 2017/03/18 13:19:00
longitudinally cut silicone vacuum line protect the water radiator fins
longitudinally cut silicone vacuum line protect the water radiator fins
0 2017/03/18 13:18:31
chinese oil cooler rad riveted to home-made bracket. additional high-temp RTV makes sure the rad stays put even if the rivets should fail and ducts all the air through the rad
chinese oil cooler rad riveted to home-made bracket. additional high-temp RTV makes sure the rad stays put even if the rivets should fail and ducts all the air through the rad
0 2017/03/18 13:18:11
the oil pump will be ditched too, although in perfect nick
the oil pump will be ditched too, although in perfect nick
0 2017/03/18 13:01:25
short block ready for 0.5mm overbore; valve cover will have dash 10 fittings welded on
short block ready for 0.5mm overbore; valve cover will have dash 10 fittings welded on
0 2017/03/18 13:01:22
these parts will not be reused
these parts will not be reused
0 2017/03/18 13:01:21
no scuffs on the crank either
no scuffs on the crank either
0 2017/03/18 13:01:19
no signs of wear on the pistons, just carbon crud
no signs of wear on the pistons, just carbon crud
0 2017/03/18 13:01:06
valve clearance was still within spec
valve clearance was still within spec
0 2017/03/18 13:00:43
stripping the engine
stripping the engine
0 2017/03/18 13:00:15
mandatory Fred Flintstone pic
mandatory Fred Flintstone pic
0 2017/03/18 13:00:01
got myself a nice hardtop
got myself a nice hardtop
0 2017/03/18 12:59:32
ready for lift-off
ready for lift-off
0 2017/03/18 12:58:59
shielded wires for O2 sensor and injectors
shielded wires for O2 sensor and injectors
0 2017/03/18 12:11:04
more sleeving
more sleeving
0 2017/03/18 12:10:38
crimped EV14 injector connectors
crimped EV14 injector connectors
0 2017/03/18 12:10:20
sequential injection + VVT + crank sensor harness
sequential injection + VVT + crank sensor harness
0 2017/03/18 12:10:04
nylon braided sleeving FTW
nylon braided sleeving FTW
0 2017/03/18 12:09:46
Twisted wires because why not?
Twisted wires because why not?
0 2017/03/18 12:09:24
Here's my homemade camber gauge. Works like a charm.
Here's my homemade camber gauge. Works like a charm.
0 2017/03/05 00:44:15
Stage 8 turbo fasteners
Stage 8 turbo fasteners
0 2017/02/27 11:18:11
Boundary Engineering oil pump
Boundary Engineering oil pump
0 2017/02/27 11:17:47
EV14s are in. Gone is idle roughness, for whatever reason.
EV14s are in. Gone is idle roughness, for whatever reason.
0 2017/02/27 11:17:22
0 2017/01/14 13:53:55
0 2017/01/11 11:52:25
ARP bolts FTW.
ARP bolts FTW.
0 2017/01/11 11:43:38
0 2017/01/11 11:42:50
0 2017/01/11 11:41:04
0 2017/01/09 15:18:42
had a lot of fun but was clearly crushed on the straights by M-cars and new Mustangs (damn those things were quick!)
had a lot of fun but was clearly crushed on the straights by M-cars and new Mustangs (damn those things were quick!)
0 2017/01/09 13:08:41
tried my best at being a Steve McQueen double
tried my best at being a Steve McQueen double
0 2017/01/09 13:08:03
did a track day and gave a GT3 a run for its money (yes, it must have been this way, for sure *lol*)
did a track day and gave a GT3 a run for its money (yes, it must have been this way, for sure *lol*)
0 2017/01/09 13:07:55