10 psi no knob in controller
#3
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,218
Total Cats: 1,144
What you typed:
Is it bad when you take the manual boost controller **** out because the spring fell out of it and run it without one in for a day and set at 10pounds at the west gate, whats the GOOD vs BAD?
What you should have typed:
I took the MBC **** out because the spring fell out, is this bad?
no, you're now just running off the waste gate. You could completely remove it by adding a longer piece of vacuum line between the compressor housing and wastegate, but a gutted MBC will do no harm. Just be sure to check your WB readings on the gauge which I'm sure you don't have.
Is it bad when you take the manual boost controller **** out because the spring fell out of it and run it without one in for a day and set at 10pounds at the west gate, whats the GOOD vs BAD?
What you should have typed:
I took the MBC **** out because the spring fell out, is this bad?
no, you're now just running off the waste gate. You could completely remove it by adding a longer piece of vacuum line between the compressor housing and wastegate, but a gutted MBC will do no harm. Just be sure to check your WB readings on the gauge which I'm sure you don't have.
#4
WHAT ARE your Afr's???????
Listen for knock. post for someone bipes settings that are running 10psi. Or contact Stephanie.
If you feel or hear any stubbling, or thumping sounds, let out! When in doubt, let out!
Watch your oil gauge sometimes now that you have just turned it up.
If it flutters around, let out. your geting knock.
___________________________________________
Did going from 5psi to 10psi fullfill your fantacy's?
Now find your friends mustang. LOL
I forgot to mail the extra spring and ball today.
I've been sick, working, busy, and taking a ALCS coarse this week. I'll try to get it out tommorrow or Sat..
Post up some pics.
Listen for knock. post for someone bipes settings that are running 10psi. Or contact Stephanie.
If you feel or hear any stubbling, or thumping sounds, let out! When in doubt, let out!
Watch your oil gauge sometimes now that you have just turned it up.
If it flutters around, let out. your geting knock.
___________________________________________
Did going from 5psi to 10psi fullfill your fantacy's?
Now find your friends mustang. LOL
I forgot to mail the extra spring and ball today.
I've been sick, working, busy, and taking a ALCS coarse this week. I'll try to get it out tommorrow or Sat..
Post up some pics.
Last edited by Toddcod; 10-23-2009 at 01:36 AM.
#13
Remember you can get a good bit out of that rear end with a little empathy. But if you dump on it, and get wheel hop. You are own borrowed time.
If your run across a 1.8L rearend cheap, pick it up. But if you show yours some empathy, you should have time to find a cheap one.
Or the 1.6L's are dirt cheap if it did blow, which one day it will. But don't live in fear, enjoy the car. If it did unexpectedly blow. i got a cheap hook up. Actually you have miata kings number.
Mine lasted a year around 12-14 psi with little empathy on take off and between gears.
If your run across a 1.8L rearend cheap, pick it up. But if you show yours some empathy, you should have time to find a cheap one.
Or the 1.6L's are dirt cheap if it did blow, which one day it will. But don't live in fear, enjoy the car. If it did unexpectedly blow. i got a cheap hook up. Actually you have miata kings number.
Mine lasted a year around 12-14 psi with little empathy on take off and between gears.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM