Need Thread Size
#1
AFM Crusader
Thread Starter
iTrader: (19)
Join Date: Oct 2004
Location: Wayne, NJ
Posts: 4,669
Total Cats: 337
Need Thread Size
While putting in LSD and axles, found that one of the axles had been pounded a little much and expanded the threads, making the axle nut too tight.
I need the thread size so that I can go out to try to buy a metric die to cut the threads down to where they belong.
Anybody?
I need the thread size so that I can go out to try to buy a metric die to cut the threads down to where they belong.
Anybody?
#2
IIRC the different axels from different years had different nuts... I believe the 1.8's were bigger....
You might want to check with the dealer.... just to be safe... maybe Randy's site will have the info? www.solomiata.com
I seem to remember when one of the 1.8 swaps done around here, the guys had to get new castle nuts....
Dave,
You might want to check with the dealer.... just to be safe... maybe Randy's site will have the info? www.solomiata.com
I seem to remember when one of the 1.8 swaps done around here, the guys had to get new castle nuts....
Dave,
#8
I used a Honda d-series axle nut on mine just the other night... during the swap we realized the axle size was different and only one axle came with a nut....
32mm honda D-series axle nut saved the day... thank goodness my buddies and I hoard our nuts/bolts
Its funny how sizes can be so common... so randomly
32mm honda D-series axle nut saved the day... thank goodness my buddies and I hoard our nuts/bolts
Its funny how sizes can be so common... so randomly
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM