General Miata Chat A place to talk about anything Miata

A/C Slush Box - Water Spills into Passenger Floorboard

Thread Tools
 
Search this Thread
 
Old 04-20-2015, 01:39 PM
  #1  
Junior Member
Thread Starter
iTrader: (1)
 
Dustin's Avatar
 
Join Date: Jan 2013
Location: Davidson, NC
Posts: 157
Total Cats: -1
Default A/C Slush Box - Water Spills into Passenger Floorboard

When I run my A/C, it will begin to sound like a slushie in my dash then when I turn or brake water spews into passenger floorboard.

I checked the drain hose under passenger side dash per another owner's recommendation, and it's clear. I even clamped the hose and the water is still spewing out.

Anyone else had this problem? I removed glove box to begin diving into the problem, but before removing unnecessary components, wanted to see if anyone else has had this problem.

Thank you!
Dustin is offline  
Old 04-20-2015, 01:56 PM
  #2  
Junior Member
Thread Starter
iTrader: (1)
 
Dustin's Avatar
 
Join Date: Jan 2013
Location: Davidson, NC
Posts: 157
Total Cats: -1
Default

After some more reading, looks like my condenser may be full of leaves/pine needles. I'll try and fit a Shop Vac on the black plastic nipple of the black reservoir and suck out what's in there.
Dustin is offline  
Old 04-20-2015, 01:57 PM
  #3  
Elite Member
iTrader: (17)
 
pdexta's Avatar
 
Join Date: Aug 2007
Location: Knoxville, TN
Posts: 2,949
Total Cats: 182
Default

That hose, it's clogged. Something is preventing water from going down that hose to drain. Pull the hose off and blow air through the end of it. Evaporators get nasty over 20 years, this is a very common issue.
pdexta is offline  
Old 04-20-2015, 02:03 PM
  #4  
Elite Member
iTrader: (21)
 
rleete's Avatar
 
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,593
Total Cats: 1,259
Default

Pull the cover, and be prepared for some very nasty ****. If that thing has been clogged for a while, chances are there's some disgusting sludge in there. Possible dead rodents as well.
rleete is offline  
Old 04-20-2015, 02:09 PM
  #5  
Junior Member
Thread Starter
iTrader: (1)
 
Dustin's Avatar
 
Join Date: Jan 2013
Location: Davidson, NC
Posts: 157
Total Cats: -1
Default

Originally Posted by rleete
Pull the cover, and be prepared for some very nasty ****. If that thing has been clogged for a while, chances are there's some disgusting sludge in there. Possible dead rodents as well.
Thanks man. When you say "pull the cover", are you referring to the black plastic box that has the small metal removable clamps? I tried briefly but couldn't get the top off - maybe there's more - I only pulled three. Had to remove glove box to get to it.
Dustin is offline  
Old 04-20-2015, 02:14 PM
  #6  
Newb
 
gpugliese's Avatar
 
Join Date: Jun 2014
Location: Southern NH
Posts: 37
Total Cats: 0
Default

Shove a coat hanger up into the condenser where the hose connects to it. Make sure you have a bowl underneath to catch the gunk coming out.
gpugliese is offline  
Old 04-20-2015, 05:35 PM
  #7  
Elite Member
iTrader: (21)
 
rleete's Avatar
 
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,593
Total Cats: 1,259
Default

Originally Posted by Dustin
Thanks man. When you say "pull the cover", are you referring to the black plastic box that has the small metal removable clamps? I tried briefly but couldn't get the top off - maybe there's more - I only pulled three. Had to remove glove box to get to it.
Yes. you are probably going to have to remove the glovebox. It's what, three screws? There's a bunch of those pain-in-the-*** metal clips around the two halves holding it together.

You want to be able to wipe out all the sludge and slime in there. It's going to smell otherwise.
rleete is offline  
Old 04-20-2015, 10:20 PM
  #8  
Junior Member
 
EricJ's Avatar
 
Join Date: Mar 2013
Location: Flower Mound, TX
Posts: 241
Total Cats: 27
Default

No screws on the glove box, just pops out. Start at the bottom.
EricJ is offline  
Old 04-23-2015, 01:00 PM
  #9  
Junior Member
iTrader: (1)
 
BarbyCar's Avatar
 
Join Date: Apr 2007
Location: Toronto, Canada
Posts: 469
Total Cats: 25
Default

Originally Posted by EricJ
No screws on the glove box, just pops out. Start at the bottom.
It's a '94. It has screws.
BarbyCar is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM
shooterschmidty
Engine Performance
8
09-30-2015 10:28 PM
ihiryu
General Miata Chat
9
09-28-2015 10:22 AM



Quick Reply: A/C Slush Box - Water Spills into Passenger Floorboard



All times are GMT -4. The time now is 09:56 AM.