Custom cowl intake Snorkel
#1
Custom cowl intake Snorkel
Been trying to find a way to direct fresh cold air into my intake system. Since my front end is pretty much all sealed up, I found another way is to get fresh air from the high pressure zone under the windshield like Randall Cowl Intake. Here is my design 3D printed in PETG. Please let me know if you have any idea to improve my design.
Last edited by OverRev; 02-13-2021 at 01:49 PM.
#9
Last edited by OverRev; 05-06-2020 at 05:23 AM.
#10
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Your FM cold air box was already getting air from beneath your headlight. So the question becomes which inlet is better: below the headlight or the cowl. To find out you would need to block one while you test the other, as I see it.
DNM
DNM
#12
Great logic, checked and didn’t have much coming in from the front. Put some wool strings there and try taking video with GoPro, they didn’t move at all. In comparison to the wool sticked on the firewall opening, they floated right in. Else I won’t waste time on this.
Last edited by OverRev; 05-06-2020 at 05:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post