will new mazdaspeed motor mounts raise or lower my engine compare to my 43K 15 year old stockers. my downpipe is seriously super close to my front subframe but i've gotten it to not contact unless making hard rights at low speed. if the new mounts lower lower my motor then it will be worse.

 

I would guess raising the engine would be the most likely scenario.


Tony

 

The mazdaspeed engine mounts lower the engine 1/4 inch.

 

mine were taller than my old worn mounts....so i guess that would put the engine higher.

 

^ ?

Mine were lower.I compared them side by side when I was installing them.

 

old mounts=compressed /deformed rubber

new mounts=fresh uncompressed rubber


tony

 

there's some slop in the mounts anyway. you can get a little adjustment.

 

when the mounts are bolted in how much threads are left to play with? like if i shim the passenger side enough to bring the downpipe further away from the subframe on the drivers side kinda deal?

 

if its too low, shim those *******.