Rough Ryder? arrrgh damnnnn it
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Rough Ryder? arrrgh damnnnn it
Argh oh please help me #3.
So the car idles and **** and timing apparently is aok. Only problem is that it idles roughly and it runs roughly. Not super mega rough but it burbles like it's ******* cammed and it's not.
Stock cams, hydra, runs the same, rough, no matter what the AFRs are, no matter what rpm, no matter what load. AFRs are ok, all sensors appear to be reading properly. Runs rough warm or cold, all the same.
WTH?
I'm pretty damn sure I have spark on all 4 cylinders since it doesn't sound like a freight train anymore.
Any ideas of **** to check?
This is for my 03. If I don't get this **** together I won't be able to run at my own dyno day and many tears will be shed. by me :(
So the car idles and **** and timing apparently is aok. Only problem is that it idles roughly and it runs roughly. Not super mega rough but it burbles like it's ******* cammed and it's not.
Stock cams, hydra, runs the same, rough, no matter what the AFRs are, no matter what rpm, no matter what load. AFRs are ok, all sensors appear to be reading properly. Runs rough warm or cold, all the same.
WTH?
I'm pretty damn sure I have spark on all 4 cylinders since it doesn't sound like a freight train anymore.
Any ideas of **** to check?
This is for my 03. If I don't get this **** together I won't be able to run at my own dyno day and many tears will be shed. by me :(
#11
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Welp the problem was fixed by filling the tank up with fresh 93oct shell. Now it idles decntly smotohly and runs decently. The engine still osunds like **** though, like it is knocking- well like something either top or bottom end was knocking. I don't lke it so I left the car at the buikder for the weekend. I did drive it around a while though and pulled 30in of vacuum a bunch on 5psi max.
It idles around 18inches but maybe thatwill get better with time?
It idles around 18inches but maybe thatwill get better with time?
Thread
Thread Starter
Forum
Replies
Last Post