fitted Bailey dump valve...no big pssshtt!
#1
fitted Bailey dump valve...no big pssshtt!
ok, the samco t-piece finally came today so, after a monumental struggle with the intake, BBR intercooler and radiator, i popped on the bailey DV26.
works fine at idle, no leaks or anything, but the only way I can get it to vent is by revving the car up to near on the red line in neutral. out on the road going thru the gears I can't hear a thing - well except for the turbo flutter which I thought the DV was supposed to compensate. does it need adjusted and if so how do I do it?
btw, I also have a manual boost controller fitted which has a tiny vent hole too.
works fine at idle, no leaks or anything, but the only way I can get it to vent is by revving the car up to near on the red line in neutral. out on the road going thru the gears I can't hear a thing - well except for the turbo flutter which I thought the DV was supposed to compensate. does it need adjusted and if so how do I do it?
btw, I also have a manual boost controller fitted which has a tiny vent hole too.
Last edited by L111CHT; 07-06-2008 at 05:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM