LRB Products
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2018
Location: Charleston, SC
Posts: 396
Total Cats: 34
They got back to me and I was able to purchase an under tray kit. I like the kit but wasn't happy with the fact I can't make the side panels work for it. I'm going to either have to trim them to make room (which defeats their purpose since air can still bypass them) or I'll make something custom myself to take up their space.
I will say the quality of the parts looks good and mostly everything bolted up without issue.
I will say the quality of the parts looks good and mostly everything bolted up without issue.
#7
They got back to me and I was able to purchase an under tray kit. I like the kit but wasn't happy with the fact I can't make the side panels work for it. I'm going to either have to trim them to make room (which defeats their purpose since air can still bypass them) or I'll make something custom myself to take up their space.
I will say the quality of the parts looks good and mostly everything bolted up without issue.
I will say the quality of the parts looks good and mostly everything bolted up without issue.
#8
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2018
Location: Charleston, SC
Posts: 396
Total Cats: 34
There was contact with the sway bar and its bracket. Not sure if it was bent during shipping because it actually looks straight with solid 90 degree edges. I will be driving the car to work Friday so I can get it on the lift and take pictures of everything. If the car was NA it would probably be fine. I'm going to take some cardboard and make a template to transfer to that so I can see what needs to be trimmed. Here is a picture from their website and I drew a line on the as to how I would probably cut it. Another option could be to make an expanded area for those running turbo setups. Something with a curve or bends on either side for the piping to clear.
Thread
Thread Starter
Forum
Replies
Last Post
FAB
Fab9 Tuning - Miata Performance Parts
12
06-10-2015 09:49 AM
TravisR
Boundary Engineering - Miata Accessories
3
06-15-2009 07:36 PM