MK1 1.8 Alternator Wiring - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to   Members

General Miata Chat A place to talk about anything Miata

LinkBack Thread Tools
Old 03-20-2014, 02:27 PM   #1
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 65
Total Cats: 15
Default MK1 1.8 Alternator Wiring

So my 1.8 starts, and runs, but I've got a bit of a problem with the alternator...

There's the main wire for the alternator, I know where that one goes...

but... the two smaller wires (The ones that are usually connected to the grey connector and plug into the side of the alternator...)

No idea of the orientation of the wires. The connector disintegrated and I've been using spade terminals to plug it back in, but my Cell Phone + SD card with the pictures I used to use is gone.

Can anyone tell me the orientation of the wires? They're white/black and white/green.

I.E. From the top of the engine looking down, white/black on top, or white/green on top?

Don't want to screw anything up by having them inverted.

Thanks in advance!
Calmdown is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
My solution for Oiltemp and Oilpressure input into Megasuirt (MS3) Zaphod MEGAsquirt 41 01-24-2016 01:25 PM
Noob to Miataturbo from MA JxPhan Meet and Greet 3 10-02-2015 03:17 AM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM
wiring wideband ground to battery terminal btabor ECUs and Tuning 10 09-28-2015 06:33 PM
Another Alternator thread ihiryu General Miata Chat 9 09-28-2015 11:22 AM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 12:26 PM.