|
New injectors? Just cause it's not turbo'd doesn't mean they can't stick. Plenty of 1.8 injectors buzzing around. Including mine.
|
Originally Posted by MartinezA92
(Post 777306)
Holy motherfuck that's a lot of NOx.
Wait, your CEL is flashing? On a '95? I've only seen this on OBDII cars, indicating a catalyst damaging misfire. EGR would explain your high NOx though, and a misfire would explain your HC which is through the fucking roof. Specifically a misfire from running super lean. I also forgot to state that the shop refused to do the test with the hood open or a fan going. I wonder if running the car with the hood closed is increasing intake temps and I wonder if they legally can open the hood to test it. |
Originally Posted by hustler
(Post 777347)
I also forgot to state that the shop refused to do the test with the hood open or a fan going. I wonder if running the car with the hood closed is increasing intake temps and I wonder if they legally can open the hood to test it.
I have a brand new 94-96 magnaflow cat that I bought just for the sniffer. It's sitting on a shelf in my garage now. Feel free to borrow it if yours is shot and you need one to pass. |
Compression (1-4)
150psi, 150psi, 130psi, 150psi I'm guessing the gauge is off because I seriously doubt 3 cylinders are not "evenly damaged". I'll compare on the turbo car in a couple hours after I "get my crunk on". Leak #'s: Harbor freight gauge fail. |
Lol, time to post in the "HF: Win or fail thread"
I don't think a bad cylinder could get 130psi even on crappy gauge...could be wrong though. |
You have a crappy idle and EGR problems....me thinks you should fix the EGR and go from there. You said you looked at the EGR but it sounds like it's sticking.
|
| All times are GMT -4. The time now is 10:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands