Hi guys,

I did my research on injectors after i actually purchased some injectors, like a noob, and i got into a pickle.

I purchased purple tops rx7 460cc injectors thinking they were 550s. The tabs don't fit the wiring harness.

Injector number is 195500-1350

Seems like they are out of a 13bt.
I was wondering if it is possible to cut and solder the connectors off of a 13bt harness?
I know this is noobish and i shouldve paid attention first and went with the regular 550s or 460ccs with plug in tabs like in the diy faq said. But they guy said they were 2020 when i lutchased them and i thought i had the right ones.

Other than that, if its not the same wiring on the connectors, is it possible to buy adapters to make them fit?

Thanks a lot guys.

 

you can cut/solder or your can get adapters

orrrr

you can get much better injectors that actually fit