Where can I get this turbo hardware?
09-27-2007, 10:46 PM
#1
!!! NOT CONFIRMED !!!
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Evington, VA
Posts: 89
Total Cats: 0
Where can I get this turbo hardware?
Sheared one of the studs in the turbo housing...it was installed cross-threaded somehow. I was hoping someone knows where I can source one?
Reply
0
0
09-28-2007, 10:04 AM
#6
I'm currently using the ones they sell at Advance and hate them. I pray I never have to take the turbo off ever again, but if I do, I'm calling Steph and having here send me about 20 of them.
Call Begi and have them send you 2 sets... that should be 18 total studs. 4xmani and 5xDP. That way you never have to worry about having them.
When you go to remove that stud, let it soak in PBBlaster or Liquid Wrench for a day or two. It should come out fine after that with a pair of vice grips.
Call Begi and have them send you 2 sets... that should be 18 total studs. 4xmani and 5xDP. That way you never have to worry about having them.
When you go to remove that stud, let it soak in PBBlaster or Liquid Wrench for a day or two. It should come out fine after that with a pair of vice grips.
Reply
0
0
09-29-2007, 07:37 PM
#7
!!! NOT CONFIRMED !!!
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Evington, VA
Posts: 89
Total Cats: 0
Thanks everyone. Found some at a specialty fasteners store in town.
**** - how about this gasket?
All of this just to rotate the housing...sometimes this "fun" is a chore.
**** - how about this gasket?
All of this just to rotate the housing...sometimes this "fun" is a chore.
Reply
0
0
09-29-2007, 08:43 PM
#10
!!! NOT CONFIRMED !!!
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Evington, VA
Posts: 89
Total Cats: 0
Reply
0
0
09-29-2007, 09:59 PM
#15
!!! NOT CONFIRMED !!!
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Evington, VA
Posts: 89
Total Cats: 0
I'm currently using the ones they sell at Advance and hate them. I pray I never have to take the turbo off ever again, but if I do, I'm calling Steph and having here send me about 20 of them.
Call Begi and have them send you 2 sets... that should be 18 total studs. 4xmani and 5xDP. That way you never have to worry about having them.
When you go to remove that stud, let it soak in PBBlaster or Liquid Wrench for a day or two. It should come out fine after that with a pair of vice grips.
Call Begi and have them send you 2 sets... that should be 18 total studs. 4xmani and 5xDP. That way you never have to worry about having them.
When you go to remove that stud, let it soak in PBBlaster or Liquid Wrench for a day or two. It should come out fine after that with a pair of vice grips.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
