P0107 CEL barometric pressure reader low input
#1
Junior Member
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Ft lauderdale FL
Posts: 405
Total Cats: 2
P0107 CEL barometric pressure reader low input
so my 99 miata stock motor/with monsterflow intake with 67,000 miles threw the P0107 Barometric pressure sensor low input. I was just wondering if anyone else has had this problem and could shed some light on this problem.
I already searched and came up with no previous threads about this specific engine code so if anyone could help that would be great.
mind you all the vacuum lines are original and their location is all stock too
the motor was pressure tested at 5psi and there were no vacuum leaks so i am having trouble figuring out what the problem could be
mazda says the new sensor is 240 which i simply cannot afford.
PLEASE HELP
Thanks
Ryan K
I already searched and came up with no previous threads about this specific engine code so if anyone could help that would be great.
mind you all the vacuum lines are original and their location is all stock too
the motor was pressure tested at 5psi and there were no vacuum leaks so i am having trouble figuring out what the problem could be
mazda says the new sensor is 240 which i simply cannot afford.
PLEASE HELP
Thanks
Ryan K
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM