Dyno can vary one from another, brand to brand... I wonder if this is an good platform to have a good comparison of our miatas.

I should be hooking up mine for a test soon as Typhoon Cyclone NURI get out of Hong Kong.

http://dynolicious.com/

http://hk.youtube.com/results?search...s&search_type=

 

Very interesting video there:
http://hk.youtube.com/watch?v=0-DFbJQbeSY

I have an iphone 3g with the dynolicious software. My Beat down 1.6L that had cops, megasquirt, no afm, FM turbo exhaust, etc... ran I think a 17.5 launching from a stop light in light traffic. i forgot the mph. I'll rerun it one of these days and post my results. No HP because i don't know the cars weight. It will be fun to see a plot of my NA 1.6L vs. my new 1.8L turbo that im swapping in.

 

Quick!!!! Send and receive MMS pictures from someone!!! ! OOh wait.. ****!

 

bought it

 

https://www.miataturbo.net/forum/sho...ghlight=iphone

iPhone said 17.0 @ 84mph, Slip said 16.2@84mph. Stock.

 

The 17.0 actually sounds more accurate than a 16.4 on a stock car.

 

16.28, 2.37 60 foot, I can scan the slips. 5k rpm clutch slip.

No A/C no P/S, just a rollbar, suspension and wheels/tires. First time out ever to the drags.

I highly doubt the timing was off. My times were mostly around 16.5.

 

you can email images to an MMS number/address. not that a dyno run is MMS....

 

I haven't run dynolicoius on my Miata yet, but I found it to be pretty inaccurate on my M45... It was showing 0-60 in the high 7's when Infiniti claims mid to high 5's. I will try it out in my Miata when I get a chance.

 

they should make this for the instinct, oh wait, we dont have an accelerometer...now maybe they could run it through the GPS....lol.

 

I tried one for 2 weeks. Never did once work. Even the AT&T Rep couldn't get it working.

 

i just texted a picture to my email and replied with a different picture and it came through fine. on AT&T.

 

scan those slip cause i've only got a 17.1 as the best time my 1.6 put down stock. look around the internet most stock miatas only run around 17's maybe a 16.5 for a 01'

r/t-.309
60'=2.7
1/4=17.1
mph=81.9

 

Well his sig says he's got a '94 which means 1.8 not 1.6...so there one difference.

 

Hmm.. Odd. I'll stick to my Evdo r.A mogul anyway.

 

im going to bring this back from the dead. Ive had this on my iphone for a while now. I used it on my last NA and I got 111 hp which seemed about right on the money with a decked head, supertech valve springs, 02 bottom end, catless exhaust and coldside intake.

I just did this on my 04 MSM with:

FM Intake kit with 02 modifier
Custom 3 inch exhaust
27x8 cxracing intercooler
boost turned up to 10psi



Made 206 hp

 

I still need to get Dynolicious, but using pocket dyno I got:

0-60: 7.49

1/8th: 10.41 @ 70.29mph

108whp (seems a little high)

I really want to see what it says once I'm boosted.

 

I had Dynolicious until i realized Revlite was free. Doesn't have all the features but you can supposedly plug your phone into an OBDII car and read out a ton of ****. Someone with a 96+ check it out!

iPhone Apps - Rev Lite | Apptism

By the way a Boeing 737 pulls about .32G's during takeoff.

 

a proper weight is needed to make accurate tests even 1/4 mile. I've found it to be very accurate as long as the weight is right. don't forget to add your own fat *** to that number. I haven't had a chance to run it in my miata yet, but have tested it at a drag strip along side the first generation g-tech and both were within 1/10th of a second. the g-tech pro however would never get close.

 

yeah i added my 109 pound fatass self in the equation lol