Can anyone tell me the stock settings for a 90 miata Air/fuel because i want to break the motor in before putting the turbo on so i want to set the safc to stock air and fuel

 

zeros on the SAFC. there is no "stock" setting. We've gone over this here before....

 

S-AFC doesnt set "air fuel" it sets MAP/AFM/MAF sensor output voltage adjustment.

 

Drew i told you this before Safc only mods the signals 0 is no change even so tweaking the map will give you more NA powah and better gas mileage.

 

You still have to setup the SAFC for the car, the original settings. Not the %'s just whatever the car type is. I don't remember what the exact settings that you had to set were, but they were different for most cars.


Such as 4 cyl, Hi/Low throttle points, AFM sensor type.

 

yeah, but it's nothing like setting the "stock afr"

so what, it's like set 4cyl, set low at 35% high at 50%, set your rpms range and increments....so if the instructions were read (which I have never) you should be at the point where the rest is tuning by a percentage scale, which at the time being should just be at 0 so there are no adjustments being made from the SAFC. right Richard?