When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On a more serious note, here is my interior setup.
Unfortunately, the shift boot/**** are cut off but it's a charcoal grey weighted Skunk2 **** (same color as the inner part of the steering wheel) with red H pattern and a black leather boot w/ red stitching from Redline Goods.
If you're interested, I can snap a better picture tomorrow if you'd like.
The wheel is a 350mm Nardi with 80mm dish, I forget what name Nardi gives it. I LOVE this wheel. I'm 6'1 so the 20mm less in diameter vs stock combined with the 80mm offset is great.
All in all, I love my wheel and shift ****/boot combo. I still need to buy some sort of low profile shift boot retainer but I'm lazy.. Anyone have any suggestions?
MOMO Drift 330mm Wheel
NRG Short Hub and Gen 2.5 QR
NRG Horn Blanking Plate and gold screws
(Horn button circuit has been hijacked to fed the ECU a signal via the button shown)
Unfortunately, the shift boot/**** are cut off but it's a charcoal grey weighted Skunk2 ****
I imagine a Skunk2 shift **** would come out of the box requiring significant additional machining work, not fit the shifter it's advertised to fit, and then come loose constantly during operation.
They offer the shift **** in the correct thread pitch. M10x1.25? It fit good out of the box and hasn't come loose in the year I've owned it. The H pattern is off by about 15° when tight though. I'm guessing some sort of shift boot retainer would fix that.
07-31-2018, 10:45 PM
0
I hope you got a decent chuckle out of it. 
