Hey guys,

Heres the story, I blew the rings in my old motor and of course all the oil ran through the exhaust and now after replacing the motor its smoking like a S.O.B!!! could it take that long to burn the oil out of the exhaust? Or am i looking at a more major prob.? I have replaced the 02sensor and my turbo was supposed to have been rebuilt before i put it on(same time i blew my last motor) although there is a little oil seeping through my b.o.v. The car runs great but just smokes real bad.If you have any ideas please let me know....


Thanks again

 

narrow the problem down before you go spending any money...
after i blew my rings, i installed my spare motor, and its burning a ton of oil, so yeah its still smoking.
your newer motor culd be ok and you turbo could be causing you to smoke
find out whats smoking and go from there

 

the only things i can think of turbo, rings.....

 

So check your IC plumbing, then check your turbine to see if its oily. Find the oil and you found your problem. If you can't find the source then leakdown test the motor to see if it's the new engine.

 

there is a little oil coming from my turbo into my ic pipe

 

 

my 2 cents is the turbo, from what you say....

 

Oil drain line, PCV, Turbo seals, piston rings, oil in exhaust from last engine, faulty head gasket.

there are more possible causes, but check those first.