I bought an aftermarket knock sensor (knocklite). I need to split the factory knock sensor signal to go to my hydra and the knocklite. If I tee into the signal will I **** up the voltage range? The knocklite read 0-5v i'm pretty sure.

 

Are you sure the factory knock sensor will work with the knocklite? I used a Bosch sensor when I had my knocklite. You probably won't get an answer here, but try running it to the Hydra first, take some logs. Then run it to the knock lite and pay attention to how it acts at various RPM. Then tee it and make sure the logs look the same and the light reacts the same.

Frank