Time for Turbo Rebuild?
#22
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
I am going to put it together and cross my fingers. I've been getting mixed opinions, so I am just going to go the cheap (initially) route.
Hoping I don't have an issue...it's literally the thinking of "What I don't know won't hurt me". I don't know for sure it is out of balance.......
Hoping I don't have an issue...it's literally the thinking of "What I don't know won't hurt me". I don't know for sure it is out of balance.......
#23
Did you mark the wheel and shaft before pulling it apart?
Some turbo's are supposedly balanced differently. Such as the compressor wheel and turbine are balanced separately then as a rotating assembly.
Then there's this:
http://www.gpopshop.com/balancing.html
Turbo Balancing
We are frequently asked by customers who purchase our rebuild kits if the turbo will need to be rebalanced after they complete the rebuild. You will not need to have your turbo rebalanced if the following applies:
-Neither of the wheels (compressor and/or turbine) have touched or rubbed the housings
-There are no worn, chipped, or bent fins on either of the wheels
-You were careful to mark the position of the wheels in relationship to each other prior to disassembly and rebuilding, and then realigned these marks upon reassembly
Some turbo's are supposedly balanced differently. Such as the compressor wheel and turbine are balanced separately then as a rotating assembly.
Then there's this:
http://www.gpopshop.com/balancing.html
Turbo Balancing
We are frequently asked by customers who purchase our rebuild kits if the turbo will need to be rebalanced after they complete the rebuild. You will not need to have your turbo rebalanced if the following applies:
-Neither of the wheels (compressor and/or turbine) have touched or rubbed the housings
-There are no worn, chipped, or bent fins on either of the wheels
-You were careful to mark the position of the wheels in relationship to each other prior to disassembly and rebuilding, and then realigned these marks upon reassembly
#24
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
Did you mark the wheel and shaft before pulling it apart?
Some turbo's are supposedly balanced differently. Such as the compressor wheel and turbine are balanced separately then as a rotating assembly.
Then there's this:
http://www.gpopshop.com/balancing.html
Turbo Balancing
We are frequently asked by customers who purchase our rebuild kits if the turbo will need to be rebalanced after they complete the rebuild. You will not need to have your turbo rebalanced if the following applies:
-Neither of the wheels (compressor and/or turbine) have touched or rubbed the housings
-There are no worn, chipped, or bent fins on either of the wheels
-You were careful to mark the position of the wheels in relationship to each other prior to disassembly and rebuilding, and then realigned these marks upon reassembly
Some turbo's are supposedly balanced differently. Such as the compressor wheel and turbine are balanced separately then as a rotating assembly.
Then there's this:
http://www.gpopshop.com/balancing.html
Turbo Balancing
We are frequently asked by customers who purchase our rebuild kits if the turbo will need to be rebalanced after they complete the rebuild. You will not need to have your turbo rebalanced if the following applies:
-Neither of the wheels (compressor and/or turbine) have touched or rubbed the housings
-There are no worn, chipped, or bent fins on either of the wheels
-You were careful to mark the position of the wheels in relationship to each other prior to disassembly and rebuilding, and then realigned these marks upon reassembly
I read that. I ignored it
I believe these parts were balanced seperately.
#25
Plenty of people on this forum rebuild their own turbos and never balance them and they don't have problems. You will most likely be just fine, though most of the people doing this don't run 20-30 psi either. We'll find out soon enough.
Edit:
More info- http://www.turbotechnics.com/docs/turbo/balanceinfo.htm
Read the Turbo Balancing section- http://www.gnttype.org/techarea/turbo/turborebuild.html
Edit:
More info- http://www.turbotechnics.com/docs/turbo/balanceinfo.htm
Read the Turbo Balancing section- http://www.gnttype.org/techarea/turbo/turborebuild.html
#26
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
When I spin it up to 12 psi, I am sure there will be some tell tell signs that something is wrong....or maybe there won't. I'm not sure.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM