What problem is the poopstain on your existence?
#21
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,433
Total Cats: 1,210
Overheating at the track.
Once I went MS I had about 3-4 different electrical problems that caused it to run on 2 cylinders. Everything from sticking injectors to a faulty COP harness. That was a pain.
Once I went MS I had about 3-4 different electrical problems that caused it to run on 2 cylinders. Everything from sticking injectors to a faulty COP harness. That was a pain.
#22
yeah mike aren't you a spelling/grammar **** half the time?
For me it was the rattle I could not find for three years, it was a cracked manifold which I had welded up... there was no way to see it while it was on the car. Now I'm getting a clunk from the rear when going from reverse to first, like after backing out of the driveway, I'm thinking bushings somewhere or a u-joint
For me it was the rattle I could not find for three years, it was a cracked manifold which I had welded up... there was no way to see it while it was on the car. Now I'm getting a clunk from the rear when going from reverse to first, like after backing out of the driveway, I'm thinking bushings somewhere or a u-joint
#29
I was going to ask the same thing before I googled it. Nothing but this thread popped up.
I hate 4th gear during downshifts. It wont go straight it anymore! And one day my gas pedal went really soft somehow. I have to push it in at least 1/2 an inch before the throttle opens. It kinda pisses me off but I've been too lazy to *** wit it. The part of the dash closest to the window is cracked to ****. Thanks to the exhaust.
I hate 4th gear during downshifts. It wont go straight it anymore! And one day my gas pedal went really soft somehow. I have to push it in at least 1/2 an inch before the throttle opens. It kinda pisses me off but I've been too lazy to *** wit it. The part of the dash closest to the window is cracked to ****. Thanks to the exhaust.
#30
I had flange warping problems with my tubular mani and pump gas. warped both flanges on the mani twice. switched to e85, more advanced spark map and begi cast mani. all good now.
Had a transmission oil leak. Took apart and reassembled with new sealant. good now.
Had a tiny coolant leak a few months ago. Seemed to be coming from the brand new pump (that I put on less than a year ago). Took off pump and replaced all seals/gaskets/etc. Was great for a few months.
Now I'm noticing a drop or two of coolant on the floor every now and then. Not any more than that, and not every day. Just randomly every now and then. WTF
So I feel ya on the coolant bullshit.
Valve tick is also annoying, but not that bad.
Otherwise since the build and 30r I am MORE THAN HAPPY to report not much else has been bothering me. Haven't really even opened the hood for quite some time now aside from to check the oil and coolant level. So can't complain too much
Had a transmission oil leak. Took apart and reassembled with new sealant. good now.
Had a tiny coolant leak a few months ago. Seemed to be coming from the brand new pump (that I put on less than a year ago). Took off pump and replaced all seals/gaskets/etc. Was great for a few months.
Now I'm noticing a drop or two of coolant on the floor every now and then. Not any more than that, and not every day. Just randomly every now and then. WTF
So I feel ya on the coolant bullshit.
Valve tick is also annoying, but not that bad.
Otherwise since the build and 30r I am MORE THAN HAPPY to report not much else has been bothering me. Haven't really even opened the hood for quite some time now aside from to check the oil and coolant level. So can't complain too much
#33
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
I have the most god-awful vibration at 4k - a typical cruise rpm - which I can't source. I thought it was my supercharger, but that's no longer on and it still does it :(
Hoping the addition of a manifold brace a-la OEM will fix it.
Hoping the addition of a manifold brace a-la OEM will fix it.
#38
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Not knowing the "right way" to wrench- knowledge of shortcuts, mechanical sympathy, what various things in my engine bay were etc. Having zero experience before my car is the cause of that. Seriously, when I got my turbo kit, I had like 30 wrong parts shipped to me and I couldn't figure out what the **** was wrong. That turbo kit install was a frustrating time.