hey everyone
06-19-2007, 01:29 AM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: chilliwack, bc
Posts: 93
Total Cats: 0
hey everyone
hey, i dont know if this is the right forum for introductions, but here it is.
my name is aj, and i just put the greddy kit on my 91 with the help of spike. actually, it was more like me helping him work on my car, because i still dont know much about turbos. i'm trying to learn though, so thats what counts, right?
anyways, my main aim is to get around 200hp. which means i'll have to upgrade the kit a fair amount. ie. downpipe, injectors, megasquirt pnp, intercooler, all that good ****. so it should be a fun adventure.
heres some pics for everyone to enjoy.
(yes i know it looks like a carnival with all the different colored couplers)
my name is aj, and i just put the greddy kit on my 91 with the help of spike. actually, it was more like me helping him work on my car, because i still dont know much about turbos. i'm trying to learn though, so thats what counts, right?
anyways, my main aim is to get around 200hp. which means i'll have to upgrade the kit a fair amount. ie. downpipe, injectors, megasquirt pnp, intercooler, all that good ****. so it should be a fun adventure.
heres some pics for everyone to enjoy.
(yes i know it looks like a carnival with all the different colored couplers)
Reply
0
0
06-19-2007, 01:55 AM
#4
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,544
Total Cats: 4
car looks nice, always been a fan of silver and the GV lip as well. Gotta ask though, why are there creases around the fender flares? Did you hammer it out or add a little bit to open it up a little?
Reply
0
0
06-19-2007, 10:47 AM
#10
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: chilliwack, bc
Posts: 93
Total Cats: 0
i have the koni yellow shocks and apex springs. i dont like my springrate, but the shocks are good.
they are flares from GR Craft. Rev9 motorsports ( http://www.pulsion.ca/rev9 ) is distributing them.
if you have rolled fenders, it undoes what the rolling did so all you have to do is shave them down a little bit on the inside of the fender arch to get your wheels to clear again.
no damage done so far, i'll see if i can get more heat wrap just for safety's sake.
hahahahahaha i never thought of it that way.
at least i have a bit of a chin scruff, so me and my car are matching.
if you have rolled fenders, it undoes what the rolling did so all you have to do is shave them down a little bit on the inside of the fender arch to get your wheels to clear again.
hahahahahaha i never thought of it that way.
at least i have a bit of a chin scruff, so me and my car are matching.
Reply
0
0
06-19-2007, 01:26 PM
#12
Senior Member
Join Date: Jul 2005
Posts: 513
Total Cats: 0
Apex suck... I started with them. Even adding spacers under the collers on the konis in the rear to help with sag, they just dropped the car too much. 75% of the time was spent on the bumpstops....
I would suggest that you consider swapping them out when you have the coinage.....
Dave,
I would suggest that you consider swapping them out when you have the coinage.....
Dave,
Reply
0
0
06-19-2007, 09:38 PM
#14
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: chilliwack, bc
Posts: 93
Total Cats: 0
i plan on coilovers when i have all my turbo stuff sorted out.
haha you'd better belieive it. its the only way to go. it'll be on the market when i get my momo wheel on.
mike, you always knew it would come to this
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
