After 3 years, Reverend Greg decides to return (OLD THREAD).
#1
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
After 3 years, Reverend Greg decides to return (OLD THREAD).
It's been 3 years and after numerous promises and emails, both here and mx5atlanta, you finally decide to post. Where are my frame rails you promised me?
Last edited by kenzo42; 10-30-2014 at 03:11 AM.
#2
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
11/11/2010
that is not the case I have had a lot of problems in the last year,I just now have gotton my internet back.It was turned off because I could not pay the bill.I will try to get back with you on thosse frame rails soon.
(G)
Originally Posted by Reverend Greg
Originally Posted by kenzo42
Hey RG,
Why have you been ignoring me on m.net?
What's going on with the frame rails? It's been 4 months since I last spoke to you and you said it would be done SOON.
It's been over a year now...
Why have you been ignoring me on m.net?
What's going on with the frame rails? It's been 4 months since I last spoke to you and you said it would be done SOON.
It's been over a year now...
Originally Posted by Reverend Greg
I know Im a pain in the ***...I will finish these soon,my car got hit by a falling tree and Ive been dealing with that ...soon I promise.
(G)
(G)
Originally Posted by kenzo42
5th day.
I am have a lot of difficulty getting my employer to put the rails in line to be bent,I will PM you in no more than 4 days to let you know when I can send them.
(G)
Originally Posted by Reverend Greg
Originally Posted by kenzo42
hey rg,
i know youre busy but its been over 2 months and i havent received the rails. you dont reply to your emails and you logged on today.
1) Hey RG, I did receive the package. Thanks. Looks great. Just wondering will it leak since there are some gouges on the mating surface?
2) Another question, you asked me $50 in the previous email. Are you asking for more because the the frame rail mounting hardware you included?
3) Lastly, any idea when the frame rails will be done?
Thanks,
Kenny
Oops,got theprice quotes mixed up,you are correct,$50.I sand the mating surface to 80 grit so it will seal...everyone always says that.I often use techniques that are more common in heavy equipment construction,The sealent on the fitting is a hightemp/pressure type for diesel truck turbos.Iwill PM as soon as I can get them bent.
(G)
i know youre busy but its been over 2 months and i havent received the rails. you dont reply to your emails and you logged on today.
Originally Posted by Reverend Greg
Originally Posted by kenzo42
Originally Posted by Reverend Greg
When I am finished with the spacer this week I will mail it to you at my cost and just Paypal me $50 to cover the cost of it(Itcosts me about that much to Make),Then I will finish the rails in a day or two and if you cover shipping on those I will call it even...For your patience and atleast subdued understanding.
(G)
(G)
2) Another question, you asked me $50 in the previous email. Are you asking for more because the the frame rail mounting hardware you included?
3) Lastly, any idea when the frame rails will be done?
Thanks,
Kenny
(G)
(G)
(G)
#3
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
More:
From : Reverend Greg
To : kenzo42
Date : 2011-02-06 15:17
Title : Re: freeze plug
--------------------------------------------------------------------------------
It is $15 + shipping and It is a Block off plate the was made to fit a 1.8L head,it has a 1/2" NPT port in the front to allow coolant lines to be used.I have one company looking at the plans for the Frame rails...and they are going to give me some quotes for a variety of materials...I have not forgotton and As soon as I know something I will PM you....we will work out a deal I know it has been forever.
(G)
From : Reverend Greg
To : kenzo42
Date : 2011-02-06 15:17
Title : Re: freeze plug
--------------------------------------------------------------------------------
Originally Posted by kenzo42
Hey RG,
How's the job hunt going? Hope everything is going ok.
How much for the freeze plug? I need one when I install the coolant spacer your made for me.
Any updates w/ the frame rails?
Thanks,
Ken
How's the job hunt going? Hope everything is going ok.
How much for the freeze plug? I need one when I install the coolant spacer your made for me.
Any updates w/ the frame rails?
Thanks,
Ken
(G)
#4
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
There was another excuse about his father in law falling off of a boat. I have that one archived on another hard drive, too as well as so many others.
The previous posts were just convenient for me to find since I don't ever go on mx5atlanta and don't use my message space there. I had to hunt him down over there since he stopped replying here at MT.
This guy is a flake, thief, and full of excuses.
The previous posts were just convenient for me to find since I don't ever go on mx5atlanta and don't use my message space there. I had to hunt him down over there since he stopped replying here at MT.
This guy is a flake, thief, and full of excuses.
#5
It was My Younger brother and He is Dead....and By your own admission You received the coolant reroute that you asked for Remember?Dude Chill the **** out out have some self repect......I am Going to send you a free set of frame rails I'll even pay the shipping....If You agree that you never paid me for rails and You got the reroute spacer in the mail.....
(G)
(G)
#6
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
I hope you understand that after the repeated excuses, though, I couldn't really sort through which were genuine. My apologies for the loss of your brother.
I never denied receiving the coolant spacer. It's been so long (~5-6 years from when it all started), I believe the deal was inclusive of the rails because of how long I waited. Nonetheless, it was offered as part of the deal which is clearly posted in the above PMs.
Regardless, Greg said he would make good on his word and I will rescind everything I say once the rails are received.
BTW, this was posted a week ago before I spoke to you yesterday on mx5atlanta.
I never denied receiving the coolant spacer. It's been so long (~5-6 years from when it all started), I believe the deal was inclusive of the rails because of how long I waited. Nonetheless, it was offered as part of the deal which is clearly posted in the above PMs.
Regardless, Greg said he would make good on his word and I will rescind everything I say once the rails are received.
BTW, this was posted a week ago before I spoke to you yesterday on mx5atlanta.
Last edited by kenzo42; 11-04-2014 at 11:47 PM.
#9
[For Sale] Free o2 sensor bungs!!!!! - Page 3
Here is a pic of the oil caps I made for the Local guys...Im going to put One aside for you Ken...I have My Press brake guy ginig me a number on making the frame rails tomorrow.
Here is a pic of the oil caps I made for the Local guys...Im going to put One aside for you Ken...I have My Press brake guy ginig me a number on making the frame rails tomorrow.
#11
Its Been Three Years And Reverend Greg Returns Like a Boss the Title should read..
LOL.
First test Piece,made from Mild Steel.Small changes are going to Be made after a trial fitting this weekend.Myself personally I am pleased with How it turned Out.
Rev.G-
LOL.
First test Piece,made from Mild Steel.Small changes are going to Be made after a trial fitting this weekend.Myself personally I am pleased with How it turned Out.
Rev.G-
Last edited by Reverend Greg; 04-17-2015 at 04:46 AM. Reason: added Pics and More Words
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM