Which craftsman? If its the on with the handle locks, go for it. The handle locks is the best thing ever, draws stay locked unless you pull on the handle.
|
Originally Posted by cyotani
(Post 1057182)
Anyone here using a US General tool chest and care to give a quick review?
I'm looking into one vs an equivalent craftsman one. They're about the same price but the quality of the craftsman ones have really dropped over the past few years I like it, but it depends on what one you get. The nice one has the nice rollers, the crappy ones have what i call friction drawers. Seems like they have no rollers on them. I'd recommend. |
Originally Posted by Leafy
(Post 1057185)
Which craftsman? If its the on with the handle locks, go for it. The handle locks is the best thing ever, draws stay locked unless you pull on the handle.
|
Originally Posted by Braineack
(Post 1057190)
I have a tool chest that I had to disable the drawer locks and it was annoying. The top set of drawers would only opne if the top lid was opened fully, but since the thing is already 5' tall, I didn't have the room to clear the shelf above it.
|
Here's the craftsman:
Craftsman 9-Drawer Ball-Bearing Griplatch Tool Chest Combo $220 + Free In-Store Pick Up - Sears Deals, Coupons and Promos It seems like it uses thinner metal and less rollers than their higher quality units. Also, I think I'd have more quantity of shallow drawers than the 4 piece bottom unit. That wide harbor freight one review on the front page is what I'm leaning toward now. http://www.harborfreight.com/roller-...ity-68784.html or http://www.harborfreight.com/26-in-8...est-67831.html |
I did get a bunch of crap from the guys in the shop when i rolled the HF unit in. But once they saw it, and noticed the quality wasn't all that bad they quickly changed their opinion. For the price, it's good.
|
Originally Posted by Erat
(Post 1057202)
I did get a bunch of crap from the guys in the shop when i rolled the HF unit in. But once they saw it, and noticed the quality wasn't all that bad they quickly changed their opinion. For the price, it's good.
|
Originally Posted by Leafy
(Post 1057191)
Almost all tool boxes lock when the top hatch is closed. I'm talking about the ones where all the drawers are locked closed, but when you pull on the handle the handle rotates up slightly and unlocks the drawer.
|
Originally Posted by cyotani
(Post 1057204)
thanks for the review sir. Snap On tool boxes seem like a status symbol to me. But I guess if it's something you use daily in a career it's worth the investment. But HF FTW for the diy garage weekend warrior.
I paid $460 for the Craftsman. 43" wide ball bearing drawers with griplatch. I just wish it was a little deeper is all, but I think I will just add a side cabinet to it later. There is a guy at work with a HF box and it looks solid to me and does the job its intended to do. I say go for it and I doubt you would regret it. I have a few HF items that have been great for me and are all at least 3+ years old: Orange foldable 1 ton shop crane Orange engine stand 1000lb Orange 12 ton shop press. Jack failed after 2 years, but just bought a replacement at Orielly. 6 Jack stands Blue Low profile aluminum jack---keep an eye on the bolts, rolling around the shop they sometimes rattle out. check them all after you buy it. Fail: 9.6 Volt Cordless, Variable Speed Rotary Tool Kit Charger failed after first full charge and the battery wont hold a charge overnight and you can only get about 5 min of use before it dies. I should have know this would happen and just bought the Dremel brand. |
There was a fellow many years ago who worked as a mechanic in my heavy machinery dealership who had a very unique toolbox. He was an extraordinary mechanic but a bit eccentric. His primary toolbox was an old wire shopping cart from a grocery store. It had little hooks welded all the way around it from which he hung wrenches and sockets from 6-100mm+. He had pressure gauges and phototachs, o-ring picks and screwdrivers in that thing. It was something to behold.
|
I recently picked up the 44" bottom roller and am very happy with it. I liked it so much, I went back and got the 7 drawer side cabinet. I didn't attach it to the roller. I bought their small wood dolly and it fits the bottom of the side cabinet perfectly once the carpet is removed.
|
1 Attachment(s)
Looks like Harbor Freight is finally selling nitrile gloves that are durable
WIN 9 Mil Nitrile Gloves Powder-Free X-Large 50 Pc https://www.miataturbo.net/attachmen...ine=1382068750 9 mil Nitrile Gloves Powder-Free X-Large 50 Pc I was strolling around a new HF that just opened up close to work and found these in the nitrile glove section. I opened up a pack at the store to examine them before purchasing, and ended up taking a box home. These are MUCH stronger than the crap HF gloves I bought previously and so far are working very well. |
I've been getting their 7mm ones actually. Not bomb proof, but 100x better than the regular crap.
I bet those 9mm are bomb proof. Must get some |
POINT 7
POINT 9 |
I've used a pair. They are very strong, very thick, and VERY hot. Don't expect to wear them more than a few minutes without dripping in sweat.
|
Originally Posted by y8s
(Post 1064277)
POINT 7
POINT 9 |
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1382140601
5/5 super win http://www.harborfreight.com/ball-jo...cles-4065.html I used it today to R&R upper ball joints on a GMC 3500, extended bed, extended cab, diesel, dually. Worked flawlessly, at both removing and installing the ball-joints. You can even pre-install the grease-fittings, and then press them in, thanks to the pass-through holes in the adapters . I made $75 in my pocket via flat-rate for the job. The set costs $70. Worth every single penny. |
Originally Posted by y8s
(Post 1064277)
POINT 7
POINT 9 |
Originally Posted by ZX-Tex
(Post 1064579)
Well actually it is point zero zero 7 (0.007") and point zero zero 9 (0.009") because a 'mil' is equal to 0.001".
but he said mm (and I didn't re-read your original post) so I guess I should have said: POINT 18 PONIT 23 |
Just to be a total dork, I used my HF digital calipers and measured the glove thickness at the fingers. It is indeed .009" as advertised.
|
All times are GMT -4. The time now is 11:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands