my 90 w/SR20DET
#29
Mazda's big block 4
I'm still voting for the Mazda FE3 (FE-dohc). I know there's only a couple of Miatas with them, but they're proven in other chassis.
A good example is an Mx-3 in PR with the fe3 swap, t3/t4, log mani, external wg, mbc:
It comes stock 86x86mm (bore stroke), so it revs like a Miata. Swap in the F2T crank for 2.2L displacement with a $500 set of forged pistons and you're ready to run over 20psi reliably. Check out the SR rods next to the FE3's (courtesy of Danny G.) Danny's car is now in Canada making near 600whp on a stock crank. -rob
A good example is an Mx-3 in PR with the fe3 swap, t3/t4, log mani, external wg, mbc:
- 14psi on pump gas - 292whp
- Bone stock, 116 octane, 23psi - 393whp - 331ftlbs
- forged pistons - 425whp 359ftlbs
- and a GLC with FE3 swap and GT35r turbo - 512whp 414ftlbs
It comes stock 86x86mm (bore stroke), so it revs like a Miata. Swap in the F2T crank for 2.2L displacement with a $500 set of forged pistons and you're ready to run over 20psi reliably. Check out the SR rods next to the FE3's (courtesy of Danny G.) Danny's car is now in Canada making near 600whp on a stock crank. -rob
#31
SR is not reliable at 500whp with a stock block. It's a great motor but its not all that and a bag of chips. Misinformation on the internet and drifter fanboys have given it a god-like status.
Pound for pound, KA's and SR's have about the same power potential. KA's are just torquier and don't rev as high in stock form.
My KA24DE with a t3/t4 never lost to an SR powered car. My old car makes an appearance in the KA-T.org video Mine was daily driven HARD @ ~300whp and lasted for years until I upped the boost and broke a ringland due to bad tuning on my part.
Pound for pound, KA's and SR's have about the same power potential. KA's are just torquier and don't rev as high in stock form.
My KA24DE with a t3/t4 never lost to an SR powered car. My old car makes an appearance in the KA-T.org video Mine was daily driven HARD @ ~300whp and lasted for years until I upped the boost and broke a ringland due to bad tuning on my part.
#35
I'm pretty sure this car was from Tampa, Florida. I remember when one was built here. I seem to recall the car being black... The SR wasn't "played out" at the time. It was "fresh." I saw it run once. It was insane. Fast? Yes... and barely controlable by whomever was in the cockpit.
fast? I wouldn't say that, the car only laid down a little over 200rwhp. And the SR has been played out for 3 years lol
#39
the ka24e's don't have oil squirters, only the de's, http://home.att.net/~MabuhayCarlos/TurboBlock.html
for those who want the ultimate 240 here is the rest of the build
http://home.att.net/~MabuhayCarlos/TurboStory.html
not to be rude magnamx-5, but just trying to show that i'm not completely brain dead
for those who want the ultimate 240 here is the rest of the build
http://home.att.net/~MabuhayCarlos/TurboStory.html
not to be rude magnamx-5, but just trying to show that i'm not completely brain dead
#40
for those who want the ultimate 240 here is the rest of the build
http://home.att.net/~MabuhayCarlos/TurboStory.html
very nice!!! that's a really nice build.
turbos are so not confusing after just sitting down and reading something like that.
seriously... a little fan powered by exhaust to force air into the intake and with added fuel and an okay tune...boom automatic fun!
http://home.att.net/~MabuhayCarlos/TurboStory.html
very nice!!! that's a really nice build.
turbos are so not confusing after just sitting down and reading something like that.
seriously... a little fan powered by exhaust to force air into the intake and with added fuel and an okay tune...boom automatic fun!