The AI-generated cat pictures thread
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,615
A tasty yet satisfying crunch.
I was really hoping that South Park would expound upon the concept of long serial story-arcs after that, rather than doing the complete opposite.
In other news, shocking behind-the-scenes footage from the 90s sensation Tetris has recently been released:
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,615
Sometimes, being the boss means that you have to shoot stupid videos to email to the company (at their request) that sold you nine very expensive robots in order to prove to them that you're not a complete moron who can't find the center-of-mass of a payload, so that they'll agree to do a "hands-off" remote commissioning of them, as your schedule requires that only 1-2 of them be put into service at a time, as opposed to all at once as is more conventional.
(Have you ever clamped your phone into a vise sitting on a stack of boxes? Neither had I until today.)
(Have you ever clamped your phone into a vise sitting on a stack of boxes? Neither had I until today.)
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,615
I mean, I get it. I'm sure they've had situations in the past where a customer didn't balance the payload properly, and then cried "warranty" when the robot broke. But really, this is simple stuff which should be intuitively obvious to any fool with an engineering degree and years of experience with machinery and robotics.
(I did not use that exact phrase when I sent them the demo video.)
You have only experienced the very least of my disdain and condensation in bed.
But yeah, Robot Army #2 is taking shape nicely.
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,615
**** ******* FUCKITY FUCKSTICKS!
That light has been green, continuously, for fifteen months. It used to turn red every 2-3 weeks, and then we'd have to spend a lot of money and labor and downtime to make it happy again. But then, in Sep-Oct of 2017, I had an "I'm as mad as hell, and I'm not going to take this anymore!" moment, after which I went completely apeshit on this room, and fixed EVERY GODDAMNED THING, and re-plumbed the whole air conditioning system BY MYSELF so that the backside of the transmitter was colder than Ruth Bader Ginsburg's nipples (hence the ugly flexible ducts, which look like **** but get the job done), and paid the manufacturer to come out and do a full calibration / alignment on the machine with the factory tools which took two solid days, and it's been ROCK SOLID ever since.
(deep breath)
Ok, this is actually not a big deal. It's still making 96% power, I can see from the remote telemetry that the fault is actually quite minor (one failed MOSFET on cabinet 1, tray 4, pallet 3), and to be fair, 15 months without a fault on a 19 year old transmitter is damn near a record.
But still... It's the principle of the thing.
That light has been green, continuously, for fifteen months. It used to turn red every 2-3 weeks, and then we'd have to spend a lot of money and labor and downtime to make it happy again. But then, in Sep-Oct of 2017, I had an "I'm as mad as hell, and I'm not going to take this anymore!" moment, after which I went completely apeshit on this room, and fixed EVERY GODDAMNED THING, and re-plumbed the whole air conditioning system BY MYSELF so that the backside of the transmitter was colder than Ruth Bader Ginsburg's nipples (hence the ugly flexible ducts, which look like **** but get the job done), and paid the manufacturer to come out and do a full calibration / alignment on the machine with the factory tools which took two solid days, and it's been ROCK SOLID ever since.
(deep breath)
Ok, this is actually not a big deal. It's still making 96% power, I can see from the remote telemetry that the fault is actually quite minor (one failed MOSFET on cabinet 1, tray 4, pallet 3), and to be fair, 15 months without a fault on a 19 year old transmitter is damn near a record.
But still... It's the principle of the thing.
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
I almost had a 100,000sq/ft building flood today with over 90,000 gallons of water.
Primary pump failure, then secondary pump failure. Installed 3rd backup pump and even that failed. Managed to get a 4th pump going with about 30 minutes to spare and was able to get the 2nd pump that failed to half way work. Ugh, finally made it out about 8:30.
Started digging out stuff like this. Vac truck is getting called first thing in the morning.
Primary pump failure, then secondary pump failure. Installed 3rd backup pump and even that failed. Managed to get a 4th pump going with about 30 minutes to spare and was able to get the 2nd pump that failed to half way work. Ugh, finally made it out about 8:30.
Started digging out stuff like this. Vac truck is getting called first thing in the morning.
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Curious if others see this as I do.
Intake cam advanced due to clockwise rotation and camshaft is positioned more CW on the pulley. Thus opens earlier than the neutral position.
Exhaust cam retarded due to clockwise rotation and camshaft is positioned more CCW on the pulley. Thus opens (and closes) later the neutral position.
Valve overlap increased due to exhaust closing later and intake opening sooner.
Intake cam advanced due to clockwise rotation and camshaft is positioned more CW on the pulley. Thus opens earlier than the neutral position.
Exhaust cam retarded due to clockwise rotation and camshaft is positioned more CCW on the pulley. Thus opens (and closes) later the neutral position.
Valve overlap increased due to exhaust closing later and intake opening sooner.