Small Displacement Motors 1000CC or less
#1
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Location: Chicago
Posts: 4,143
Total Cats: -5
Small Displacement Motors 1000CC or less
I'm looking for a place that has small displacement motors (ie motorcycle engines) for sale. New motors are ok, ideally with integral transmission.
This is for my open wheeled racer, lets see those links.
This is for my open wheeled racer, lets see those links.
#3
Absolutely ebay... or Craigslist for wrecked sportbikes. You might also see if there's a local sportbike club in your city with a website... there might even be a Motorcycle Salvage place near you.
Try this:
http://www.fullthrottlecycles.com/li...-Illinois.html
Here:
http://www.chicagomotorcycleguide.com/REPAIRS.HTM
Clubs:
http://www.chicagomotorcycleguide.com/CLUBS.HTM
Try this:
http://www.fullthrottlecycles.com/li...-Illinois.html
Here:
http://www.chicagomotorcycleguide.com/REPAIRS.HTM
Clubs:
http://www.chicagomotorcycleguide.com/CLUBS.HTM
#6
Loki-in my previous venture and attempt to make a living, i bought salvaged cars at insurance auctions...and i dont know how many bikes (all sorts) i've seen go for $400-500 with relatively low mileage, almost new bikes, less than 1-2 years old, people wreck them all the time, this may be your best bet...if you buy a whole bike (even wrecked), you may not have to fab as much stuff on your own to get to work right...
i've always wanted to make my own open wheel car and thats how i would approach the drivetrain
GL to you
i've always wanted to make my own open wheel car and thats how i would approach the drivetrain
GL to you
#9
maybe...i remember doing a lot of fishy things to get by, your state may be different...when i lived in AK i didnt need anything but a reg. business license, which was free i believe, here in NC i had to pull some strings
do this if they require a license:
if you know someone that does it, offer them money to take you as a guest, if your nice they may not even charge you at all, i bought stuff for people before, they usually just gave me 50-100 bucks just as a good deed i guess
if you dont know anyone, well then you gotta get creative, and money talks,
GL i hope it works out for you
and 600 cc is good power, seen some 900's woa fast
do this if they require a license:
if you know someone that does it, offer them money to take you as a guest, if your nice they may not even charge you at all, i bought stuff for people before, they usually just gave me 50-100 bucks just as a good deed i guess
if you dont know anyone, well then you gotta get creative, and money talks,
GL i hope it works out for you
and 600 cc is good power, seen some 900's woa fast
#12
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,039
Total Cats: 6,604
Indeed. Down here in San Diego county we see a lot of young Marines purchasing brand new GSX-Rs, YZFs, ZXs, and CBRs, and then promptly attempting to violate Newton's first and third laws of motion with them.
Visit the motorcycle shops in your area and find out what happens to these bikes. Some smaller M/C shops even keep their own junkyard out back. The damage to these bikes tends to involve the frame and front suspension. Damage to the drivetrain is often little more than some scuffs and scrapes. Usually, any bike with signifigant frame damage (especially around the fork head) is written off. If at all possible however, try to obtain the damaged frame along with the engine- having the frame (with its associated numberplate) can be valuable if you ever have to deal with DMV. Not to mention getting your hands on all the electronic bits that Mach929 mentions. Aside from bypassing the kickstand switch, you can probably the use whole wiring harness as-is.
Visit the motorcycle shops in your area and find out what happens to these bikes. Some smaller M/C shops even keep their own junkyard out back. The damage to these bikes tends to involve the frame and front suspension. Damage to the drivetrain is often little more than some scuffs and scrapes. Usually, any bike with signifigant frame damage (especially around the fork head) is written off. If at all possible however, try to obtain the damaged frame along with the engine- having the frame (with its associated numberplate) can be valuable if you ever have to deal with DMV. Not to mention getting your hands on all the electronic bits that Mach929 mentions. Aside from bypassing the kickstand switch, you can probably the use whole wiring harness as-is.
#14
something to consider, and maybe you've already looked into it, but the oiling systems on MC engines are not designed for the lateral loads that car can generate. on a motorcycle, going around a corner basically keeps the oil in the pan and around the pickup due to leaning the bike over.
on a car, the oil will slosh pretty badly. back in my fsae days we did some testing and the engine loses oil pressure almost immediately when you enter a corner. we then took a few heads apart and found the camshaft bearing surfaces to be in absolutely horrible shape. this was on a cbr f4i engine.
you might want to invest in an accusump, or at least add some baffles to the oilpan.
on a car, the oil will slosh pretty badly. back in my fsae days we did some testing and the engine loses oil pressure almost immediately when you enter a corner. we then took a few heads apart and found the camshaft bearing surfaces to be in absolutely horrible shape. this was on a cbr f4i engine.
you might want to invest in an accusump, or at least add some baffles to the oilpan.
#15
a lot of good points, a motorcycle buys wrecked bikes from insurance co. so they can turn around and make money on them, therefore, you know you will pay more vs. buying it yourself...think this way, why does planet miata buy every wrecked miata on the east coast that they can get their hands on, im just trying to point you in the right direction if you want to go the cheap route...im an expert at that, lol
GL
GL
#16
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Location: Chicago
Posts: 4,143
Total Cats: -5
something to consider, and maybe you've already looked into it, but the oiling systems on MC engines are not designed for the lateral loads that car can generate. on a motorcycle, going around a corner basically keeps the oil in the pan and around the pickup due to leaning the bike over.
on a car, the oil will slosh pretty badly. back in my fsae days we did some testing and the engine loses oil pressure almost immediately when you enter a corner. we then took a few heads apart and found the camshaft bearing surfaces to be in absolutely horrible shape. this was on a cbr f4i engine.
you might want to invest in an accusump, or at least add some baffles to the oilpan.
on a car, the oil will slosh pretty badly. back in my fsae days we did some testing and the engine loses oil pressure almost immediately when you enter a corner. we then took a few heads apart and found the camshaft bearing surfaces to be in absolutely horrible shape. this was on a cbr f4i engine.
you might want to invest in an accusump, or at least add some baffles to the oilpan.
#18
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,039
Total Cats: 6,604
On the other hand, the Kawasaki ZX series engines are reputed not to suffer from oil starvation on lateral loading, and are in fact used on the T-rex automobile. Simiarly, the BMW K-series engines have been widely used in the Grinnall Scorpion 3, again without modification to the oil system. Some have even turbocharged them.