60-100mph pull
#25
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,612
Total Cats: 567
Ran that log through virtual dyno. Looks like 270whp or so peak.
Was that 3rd/4th pull done on a flat ground? If its slightly downhill or uphill it would be effected.
Edit: i really want one of those stickers as well. can i get one maybe 1/2 or 1/3 the size? Small enough to read but not that big.
#30
Senior Member
iTrader: (2)
Join Date: Sep 2009
Location: Edmonton, AB, Canada
Posts: 1,193
Total Cats: 29
that looks real quick, actually. considering its a 5spd I question the accuracy of your speedo...
this was at 300whp or so. with my clusterfuck of 6 speed, 3.9 rear and 4.3 or 4.1 speedo sensor, the speedometer reads a little bit low (like 2% low) through the whole range.
this was at 300whp or so. with my clusterfuck of 6 speed, 3.9 rear and 4.3 or 4.1 speedo sensor, the speedometer reads a little bit low (like 2% low) through the whole range.
I miss driving my car......
#31
I'm assuming the additional shift in Soviets run brings them closer together and if his speedo is 2% low and mine is 1 or 2% high that might account for the gap. Cuz I don't think there is a way my car would be making that much power based on fuel flow rate alone.
#35
Its full boost by ~5k in 3rd and 4th and I'll have 5 pounds by 3.5k typically. Boost comes in a little higher in 2nd but its not terrible for a little washed up and worn out 1.6. I think a better exhaust would help drastically.
Most people don't like the "big bang" supra setup but that's exactly what I was shooting for with this.
Most people don't like the "big bang" supra setup but that's exactly what I was shooting for with this.
#38
Just for reference here is a similar setup...
https://www.miataturbo.net/dynos-tim...e-12psi-46073/
235whp @12psi
https://www.miataturbo.net/dynos-tim...e-12psi-46073/
235whp @12psi