Painted the interior and bay.
 

Before:
Attachment 197015

Primed:
Attachment 197016

After:
Attachment 197017

Before:
Attachment 197018

After:
Attachment 197019

Before:
Attachment 197020

Primed:
Attachment 197021

I realized i don't have any door shots after the paint. Will snap some more tomorrow.

your car is a damn beast. I want a ride:D

Best job yet for sure. friken awesome. Cage comes next ;) Just wait for that...

In for lime green cage. Dark gray might be more livable long term though.

Damn, your before was cleaner than my car has ever been!

Looks really nice.

+1

how much was that cage?

They run just under 2k from Tony @ TC Designs done like that. A basic spec miata cage is about 1500 IIRC

planning on liming my interior with a rattle can, will be sexy

That is a nice paint job!

1800 w/ window net.

Relocated both fuses boxes to the passenger side footwell. Well fab up some sort of bracket to mount them high enough so its not seen and able to get kicked.

http://i6.photobucket.com/albums/y23...r/IMG_5240.jpg

Attachment 196748

Attachment 196749

Attachment 196750

Got the main harness down to this:
Attachment 196751

In the process of soldering everything back inside the cabin, looming it all together, the wire tuck is going to be tits with this sweet 16 pin firewall mounded plug, everything under the hood will plug into this guy. CAS/Fuel harness/Oil & water temp sensors, Fuel pressure, and oil pressure. Going to mount it to the right of the clutch line where the hardline and "soft" line meet on the firewall. Everything will be braided together for a nice clean look in this sleeving.

http://www.jameco.com/Jameco/Product...mag/695383.jpg

http://www.jameco.com/Jameco/Product...mag/913660.jpg

Nice job Sav....err...I mean Nick:D

Amazing work man, looks great.

mmmm, red stripe

Does that mean when you pull the engine, all you have to do is disconnect one big plug?

As far as wiring goes, it should be that plus the main positive going to the starter from the battery.

that shit will definitely be tits! dammit snowbarder, your making me want to do this to my car. i already got to much shit to do.....

heh If only i could drive as good.

As well as the two for the alternator. The wiring is never the issue when pulling a motor, its always all the other crap that takes the time up. I figured while i have everything out i might as well do it properly.

If you ever have the time you will love the end results for sure. Its about 80% done at the moment and i cant do anything but smile at how nice its become. The most annoying part is looming out everything you don't "need" after that it goes back into the car. Then trimmed down even further for proper fitment. The nice thing will be two clips in the bay just to undo everything.\

Must have pulled a solid 20lbs of wire out :o

I've thought about doing this as well. Except sometimes I hate wiring so it's not high on my list