I'm new to the Miata!

Had a Nissan 200sx s13 running at 270bhp before I had a blow-out and spun into a car!

I have a 1991 mx5 and want to turbo it. I really need some help!

I have a rebuilt T28 Hybrid with braided oil / water lines which I took off my 200sx. I also have a FMIC built by Norris Designs. I am hoping to use these on my Mazda?

Pics:

http://i296.photobucket.com/albums/m...l/100_2716.jpg

http://i296.photobucket.com/albums/m...l/100_2719.jpg

http://i296.photobucket.com/albums/m...l/100_2721.jpg



I need help on which manifold and downpipe I need to fix the T28 on. I have searched, promise!

I understand I will need to run aftermarket management, bigger injectors etc.

Any help much appreciated!

 

There are a bunch of T2 based turbo manifolds and downpipes. Check out flyin miata and begi. Also absurdflow makes some sweet setups.

 

Thanks for the info. I have looked on the websites but haven't really found what I want.

However, I have found an 'ebay manifold' with a warranty against cracks:

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

..and then I would need this flange also from the bay:

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

Would this leave me enough room? Can I get a downpipe to fit?

 

Lol, good luck with that. Why not just by a T2 cast manifold from flyin miata or begi instead of doing the stupidest thing and buying a manifold not for the turbo, and then trying to adapt it and hoping that it actually fits. Good luck with the downpipe.

 

I was thinking of doing that stupid thing because it is the cheaper option and I save a hell of a lot on postage. Plus I'm new to all this so need advice!

Your running this setup right?

http://www.flyinmiata.com/index.php?...0%20%201990-93

Which I assume cannot be used with a 1600cc.

So, this is what I need:

http://www.flyinmiata.com/index.php?...21000%20%20DUC

...and this downpipe?

http://www.flyinmiata.com/index.php?...umber=22-46000

 

And this upper section:
http://www.flyinmiata.com/index.php?...umber=22-20100

Or, select "90-93" in the drop down menu to make it fit a 1.6
http://www.flyinmiata.com/index.php?...0%20%201990-93

 

Item Number: 22-20000, just choose 90-93 for the 1.6. It isn't as cheap as the ebay setup, but at least you're getting parts that are going to work and fit properly.

 

Welcome looks like you have some awesome parts to start the build.