Noobatron here to sponge your knowledge
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
wish I could take credit for the plate but I purchase both of mine from a member on clubprotege.com Hopefully it works out great but I am along way from the toyota box swap. Just gathering parts for now.
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
What Porsche stuff?

my 75 911 and 3 914's. These were my passions but I got a job on the wetter side of my state and needed to get something a little more practical. I chose mazda, A) because I had had a 91 egt in highschool and B) because they seem to share porsches(aircooled that is) philosophy of good handling and lightweight. I still have all these cars but I had to leave them with my parents for now. Im looking to buy a house in the next 6 months so hopefully I can have them all on the same property some time soon.

my 75 911 and 3 914's. These were my passions but I got a job on the wetter side of my state and needed to get something a little more practical. I chose mazda, A) because I had had a 91 egt in highschool and B) because they seem to share porsches(aircooled that is) philosophy of good handling and lightweight. I still have all these cars but I had to leave them with my parents for now. Im looking to buy a house in the next 6 months so hopefully I can have them all on the same property some time soon.
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
Lots of plans and lots of dreams here. Focusing on the mazdas for now.
Joined: Sep 2010
Posts: 8,146
Total Cats: 1,087
From: Lake Forest, CA
Gotta do the subie swap on one of them for sure. a built 2.0 subie in one of those, forget making it look nice... that'd be tons of fun.
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
Hory shiet, you are reading my mind! I actually would like to do that pretty soon, but as stated previously, I need to get them over with me. Kits are becoming quiet cheap to do this, 1/4 turn fastners with full fiberglass fenders would be a fun build, light and cheap. Some day soon.
Joined: Sep 2010
Posts: 8,146
Total Cats: 1,087
From: Lake Forest, CA
I will watch for the build thread after you get your house.
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
^ thanks, The escort has been the first car that I built start to finish. It was fun and a good learning experience but I am ready for some next level awd shiz and to get my porsche projects back under way! Still considering a miata for the wife if she'd give up her damn corolla.
Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
Escort is gone, I was able to sell the shell

Pulled the motor first

I'll hopefully be dropping my b6t back into the gtx this week

That should free up some garage space
Here are some pics of the stash
Bpt setup out of the escort, will be going in the pro4wd temporarily

Gtr motor that will eventually end up in the pro4wd plus some other bits for it





Pulled the motor first

I'll hopefully be dropping my b6t back into the gtx this week

That should free up some garage space
Here are some pics of the stash
Bpt setup out of the escort, will be going in the pro4wd temporarily

Gtr motor that will eventually end up in the pro4wd plus some other bits for it




Thread Starter
Junior Member
iTrader: (11)
Joined: Oct 2011
Posts: 296
Total Cats: 7
From: Bellingham, WA
There are some more goodies for the pro4wd coming, ill post pictures later
I'm just going to dump the rest of the pictures I took and field questions




Numbers wise, I a planning to max out the vj23 on the gtr block, supposedly it's a 350-ish who capable set-up, we will see. The other Bp I am building is getting all my forged pieces plus a bp4w head, may switch to a vvt, Holset hx-35 and custom intake and exhaust manifolds. I want to max it out as well and get something like 450 awhp in the gtx. Wish me luck!
I'm just going to dump the rest of the pictures I took and field questions




Numbers wise, I a planning to max out the vj23 on the gtr block, supposedly it's a 350-ish who capable set-up, we will see. The other Bp I am building is getting all my forged pieces plus a bp4w head, may switch to a vvt, Holset hx-35 and custom intake and exhaust manifolds. I want to max it out as well and get something like 450 awhp in the gtx. Wish me luck!







